LANTAC UK

I have had dinner with him, he is a top bloke....

Hope a few will find this interesting. We have started compiling long term test data of our products to demonstrate reliability as well as specific design criteria.

The first white paper cover parts of our E-BCG bolt carrier group that was famously used in the 2019 SAS Nairobi mall incident. Where a single SAS soldier entered 14 Riverside Drive Hotel & Office complex to eliminate a terrorist threat.

He had a Lantac E-BCG in his L119A2 Rifle.

https://www.lantac-usa.com/e-bcgwhitepaper

The same design baseline is used in out dedicate Straight Pull BCG, that share similar key features and can be found in our Straight Pull AR15 rifles.

More information can be found in a Janes Defence Weekly article, link below for those with subscriptions:

Dstl showcases ongoing tech projects from its labs at Porton Down (janes.com)

Janes very kindly sent us a PDF of the article too.

FILS is due to air on Forced TV BFBS soon.

Dstl showcases ongoing tech projects from its labs at Porton Down.PDF

Only when they release it. We are signed up with NDA's so cannot say any more unfortunately. 

Now its finally been released you can read about the FILS rifle system that Lantac UK/USA developed for UK MOD / DSTL. Great project to be involved in and we undertook a huge amount of research work to deliver a very interesting prototype weapon system...

https://www.gov.uk/government/publications/dstl-the-science-inside/the-science-inside

Ase Utra was sold off to a larger company with new ideas a while back and they have indeed discontinued the JetZ range, although there is still plenty of stock of those excellent suppressors in the UK.

The new (reduced back pressure) DUAL looks to be replacing the JetZ, although actually a completely different design based on more 'flow through' technology that has become the latest fashion. The flow through concept reduces the amount of baffles within the can that causes excess back pressure on gassed ARs. The effect increase carrier speed and thus cycle time as well as dumping a lot more propellant into the upper. The flow through design isn't as efficient as a traditional baffle with the downside being less dB reduction. Looks like the new DUAL-S-BL reduced sound by 18dB as compared to the JetZ CQBS 28-32dB. The SL range remains the same by the looks.

15 hours ago, Gandy said:

That’s brilliant thanks for posting interesting. Were most groups of photos consistent with each other or were their variances? 

These were stills taken from video. The camera can record up to 1,000,000 frames per second at reduced resolution. You can capture a bullet at 20,000 to 40,000 quite effectively at HD resolution.

A few stills from High Speed video. We purchase a Photron Fastcam last year that allows us to do in depth analysis of muzzle device design and gas flow in the real world.

This was a 220Gr Subsonic 300 Blackout in quite a short barreled rifle (9.5'').

We have some combo packs for the Radian Rator charging handle and Talon ambi safety, just for the M&P 15-22.

https://www.lannertactical.com/m-p-15-22

yes its possible. Is it thermal cure or not though?

While we dont have semi auto 223 ARs in the UK. Our good buddy John may just help you

 improve your shooting form, with his LANTAC LA-SF15 rifle.....

https://www.youtube.com/watch?v=2yWgvIq9YM0 

Available with a Vortex  UH-1 included or without optics the new Stealth Raven is precision machined by us in Fort Worth Texas from certified 7075-T6 alloy. After MIL-STD anodising it is Hydro Dipped and clear cerakoated using 100% original Crye Multicam Films.

More information can be found here:

https://www.lannertactical.com/22lr-stealth-raven-rifle

Complete Specification:
Caliber: .22LR, Semi Auto.

Barrel: 12.5'' 1:16 Twist, M4 profile, 4140 CM, SBN. Precision 11° Crowned.
Chamber & Feedramp machined & polished, full inspection.
A2 compnensator threaded 1/2-28.
SPADA-M® 10.5'' Ultra Light Handguard, Hydro Dipped Black MULTICAM.
Magpul MBUS Front & Rear Sights, Black Polymer.
Full Length Ejection Port Cover.
Magpul MOE+ Rubberised Black Polymer Pistol Grip. 
LWRC Ultra Adjustable Compact Stock, Black Polymer.
Precision Billet 7075-T6 AR15 Receiver Set. Certfied Alloy, Milspec Anodised, Hydro Dipped Black MULTICAM.
Trigger: 2 Stage Geissele SSA-E, 3.8lb.
Boonie Packer Better Mag Adapter with last round hold open.
Smith & Wesson M&P 15/22 25Rnd Magazine.

Lantac UTP-S™ Stainless Steel Takedown Pin Set, Nitrided Black.

Lantac RPS™ (Ratchet Plate System) Castle Nut & Endplate with rear Sling Mount., Nitrided Black.

Lantac UFA-S™ Low profile, reduced weight Forward Assist, Stainless Steel, Nitrided Black.

Magpul textured Rail Panels and Hand Stop, Black Polymer.

Weight: 5.11lbs (2.317Kg) (Unloaded).
Length: 26.0'' (66.0cm) (Stock Collapsed).

Now extremely rare a bit like that Gen1 UBR too....

Hi Darren. Yes we hope to have .22LR and the Side Charging version available by end Q3 this year.

close up...

As a company that constantly pushes design and styling envelopes we are pleased to release our ONYX range of receivers... Also available with our billet side charging upper in the same style too.

All materials are certified 7075-T6 Alloy and annodised to the Mil Specification  MIL-A-8625, so that you receive the absolute best finish for your firearm.

More info and pictures to follow.....

On 3/8/2019 at 2:58 AM, terryh said:

Looking at suppressors for a 300NM preferably with a muzzle brake in the mount.

Have no experience with the ASE Atra range but they have their BL system which seems to fit the bill?

Needs to have a 5/8-24 UNEF thread , would also look to go to same setup for my 6.5x47

Any comments on ASE in general and the BL system if you've handled/used them?

Who else B&T?

Cheers Terry

Hi terryh

You will have to check on the exact suppressor you want to use but we have worked with Ase Utra for a long time, we have some of the best brakes available that will mount with their suppressors. Hopefully the website is clear, if not more than happy to help explain.

You can use one of our brakes with an adapter collar to mount to one of their suppressors. Its best of both worlds... dont think you will be disappointing, this device has a pretty amazing track record

https://www.lantac-uk.com/suppressors-mounts

Hope this helps....