UniqueAlpine

Hi Paul could you send me the contact details of how to buy the annealing machine regards John

I have had one of these for several months now, and can anneal cases both reliably and quickly (about 8 x 308 cases per minute; I also have a 223 disc). It is a very solid unit due to the use of thick stainless steel sheet. I have already annealed over a 1000 cases with it and still have over half the gas cylinder remaining.

 

I use a GoSystems Fine Flame Power Torch with 400ml Rothenberger propane cylinders (no need to use MAPP), my wife shoots FTR too and was happy to sacrifice a couple of baking trays to let the cases fall down onto. You do need a fine flame torch, and not a general purpose or swirl flame torch.

 

http://www.go-system.co.uk/catalog/product/view/id/258/category/22/

 

 

Use a couple of spare cases to get the timing sorted each time; the case needs to move out of the flame just before the flame changes colour to orange. You can initially use 750F Tempilaq on the inside of a few necks if necessary, just to check. This ensures that the neck gets to 750F to anneal it, but the area just below the shoulder does not get above 450F. I now anneal my Lapua 308 Palma cases every time, because it is so easy.

 

I bought mine from Lubo, and it arrived (from the EU, Bulgaria if I remember correctly) in the timescale that he promised, and he kept me informed every step of the way. Very nice guy to deal with and if I lost mine, I would buy another.

 

If you have any questions about using it, or need any more info about owning/using one, just send me a PM.

 

Paul