Geezedtee

A Barrel Tuner can tweak a good load, but it won't turn a bad load into a tack driver.

Thank you, I'll give it go.

10 hours ago, jcampbellsmith said:

One good thing about Strelok Pro is it can be run on a PC using an emulator. This allows lots of easy data entry and data verification. Secondly, Strelok Pro is not short of scope reticle profiles or .22 LR data. 

Regards

JCS

Emulator? Would it work on a Mac as well?

Now sold

Hi all.

I'm after a Forster Universal Bullet Puller, plus a .264/6.5mm collet to go with it.

Cheers

PRICE DROP.

£40 for the 2.

IMR Enduron 4955. 1 tub still sealed and a 1/2 tub. Bought new late last year
Used it in my 6.5x55 with 140gr bullets. It worked really well.
Selling because I've gone to 114gr bullets.
£50 ONO the pair. Buyer collects.

This powder is advertised elsewhere.

I have a 6.5x55SE, 20" barrel. It does the job but ideally, to get the best out of that cartridge, it needs to be over 22". Particularly if using 140gr bullets. 

I had my Rem700 cut down to 16". My MAE moderator - the long over barrel one - came to within a 1/2" of the stock fore end.

It actually looked very good, balanced well and shot better than before the chop. I was only using it for stalking out to 250m and it worked very well. I didn't notice any loss of performance at those ranges, but it was really handy to carry and use. 

looking forward to seeing the stainless models.

Good Luck

I've just had clarification that it will work, so cancel my last.

WORTHINGTON CYLINDER CORP UL2317 Brass Pencil Flame Torch Head.

This what was recommended in the instructions.

Just been on Ampsplus.co.uk and all 18650 batteries are out of stock.

Hi.

I've just PM'd you.

I have a rabbit control contract and the client wanted me to have £10m cover. I used Lycetts as an individual and was paying over £120 per year. Then I  joined the NGO and discovered their insurer was also Lycetts and the cover was identical for a third of the price.

I've used Lycetts before  and after Brexit with no issues. So they should cover N Ireland.

Public Liability Insurance, I use Lycetts which comes as standard with membership of the National Gamekeepers Organisation.

Additionally a Risk Assessment. Particularly if there are security patrols or members of staff present when you attend site to shoot. 

On 7/12/2023 at 12:00 AM, Richiew said:

Just for info guys and gals .

loaded 100 308 lapua new cases and found them very hard to push the bullet into the case . Even had marks/ deformed bullets with the effort needed. 
Bought a L E Wilson mandrel die and found all the other100 case’ s needed a good amount of re sizing. So the moral of the story is resize lapua brass back to the proper size and save yourself having to fire form  them . The quality ain’t what it used to be . 

Yes, same experience here with Lapua 6.5x55 brass. Also noticed varied primer pocket depths. Your expander mandrel die looks like a lovely piece of engineering compared to my Sinclair LoL.

This is the Black Sun Dark Engine 850nm model.

In full working order and as new condition.  With illuminated 3 stage brightness tail cap.

RRP is £96.  looking for £50 plus postage.

This is the LR 032 sold by Blackwoods Outdoors. Complete with the adjustable mount and Picatinni fitting.

In full working order and in excellent condition with no scratches or dings on the LRF. A few very small scratches on the picatinny fitting. 

The RRP is £149.   Asking for £80 plus P&P.

Hi Andy.

I'm after some spare spacers for my Vulpine.

What is the UKV discount code?

ATB

On 5/21/2023 at 9:48 AM, Bianchi said:

Same issue here now. Where can I find the boxes in the new version? TIA

Same here. I've got nothing that looks the box above. Where is it?

5 hours ago, GT3_richy said:

If I click the "New Posts and New Activity" button I just get the following message:

"Sorry, there is a problem
Something went wrong. Please try again."

Been like it for the last couple of days+

W11 with Opera/Chrome.

me too, for the past 5 or 6 days. her sent a message to mods.

Found this in my box of bits. There is no makers name on it. It's made of steel.

It came off either a Mannlicher CL2 SX or Mauser M12, sadly can't remember which.

Any help would be much appreciated.

Thank you all. British made too, so that's my belated Xmas pressie sorted.