dasherman

It’s an unchambered blank and stainless

I have one .303 No4 profile Bartlein left in stock.

Many years ago fitted a 595 into a AICS chassis. There is a lot to get right. Bolt hole positions, bolt handle slot, mag well position and height of action in chassis to get correct feeding. Not simple.

Both stocks provisionally sold subject to payment.

Red stock provisionally sold.  

2 x benchrest stocks. Black marble one MacMillan Edge used had a BAT S action in it, weighs 720g £130 posted. Red one new Remington footprint weighs 685g £90 posted within UK.

pm sent

Pm sent

Provisionally sold subject to the usual

Contents of the “don’t need that any longer “ box. Selling as one lot, will not split, what you see in the pics is what you get. £60 collected or £72 with Parcelforce 24 hr delivery.

Wilson 6mm PPC seating die + base

Wilson PPC neck die - no bushing inside

Redding PPC comparator die

2 x leather bolt hosters

2 x bolt grease syringes

2 x sets air gun 1” mounts, 1 single screw, 1 double screw

Magnaspeed crono - have never used it so cannot say it’s working but believe it is, probably needs new battery

4 x black condors mod covers, 2 x 185x170, 2 x 185x115

Weaver rail for Remington 700 SA 0 moa no screws

Sinclair NT-2000 neck turning kit with 6mm/.223 mandrills

Gun Digest Revolver book

Provisionally sold subject to the usual

Mailbox emptied

A new unopened copy £15 inc postage

SOLD

SOLD

oops, double post.

CMMG .22lr AR15 with two 25rd mags. In good condition. £500

CMMG .22LR rifle in good condition with two 25 rd mags. £500 

Heavy duty steel barrel vice, rule in pic for scale only and not included. Heavy so collection only £60.

Stolen

What extractor did you use to cope with the larger case Andy?

Look under Sako 461

He’s obviously not machined the ones supplied to Purdey then

If your confused over which blank is which Dave just remember the Bartlein will be the one that the bore size stamped on the end relates to the actual pilot bush you’ll use whereas the Sassen will be all over the place. Nice bit of wood.

Will work on a Sako A1 action. Sometimes get a feeding issue due to the massive hole in the front of 25g Berger’s but should be fine with Vmax. Have built a couple using these actions.