kernel gadaffi Posted January 25, 2010 Report Share Posted January 25, 2010 I've just obtained a new 30mm tubed scope with a 50mm lens, the mounts that came with it are too small and cock the scope too far to the right, I have a CZ 550 American with 19mm scope rails, any suggestions? Link to comment Share on other sites More sharing options...
Cornishman Posted January 25, 2010 Report Share Posted January 25, 2010 You might be best off with rings specifically designed for this action and which also have a lug that fits into a recoil insert in the front groove. Warne do well-priced rings and I've used them in the past and they're tough. Warne packaging also shows the objective size as well as a generic 'Medium' or 'High' description so you shouldn't have a problem getting the right size. Not sure how you've determined the sideways cant if your current rings are too small but I'd be surprised if this was a manufacturing fault. Were the rings specifically for a 19mm groove? Link to comment Share on other sites More sharing options...
kernel gadaffi Posted January 25, 2010 Author Report Share Posted January 25, 2010 The scope rings were supplied with the scope, so I'm guessing they're "a one size fits f**k all" Link to comment Share on other sites More sharing options...
kernel gadaffi Posted January 27, 2010 Author Report Share Posted January 27, 2010 SORTED Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.