T3_tinker Posted August 15, 2018 Report Share Posted August 15, 2018 Has anyone come up with anything to improve this arm (apart from buying a different press!). Every time I use it to prime or when decapping with the fl die it either sticks or keeps falling out. Link to comment Share on other sites More sharing options...
blueheckle Posted August 15, 2018 Report Share Posted August 15, 2018 I had this problem whats happening is the arm is sticking on the lift and coming of its seat, what I did was clean its seat and gave the arm a polish with emery paper etc problem solved HTH Link to comment Share on other sites More sharing options...
cooter Posted September 6, 2018 Report Share Posted September 6, 2018 I took mine apart and found the shouldered bolt/pin had worn. I wrapped some tin foil around the groove in the handle and no problems since. One day i'll get another bolt and fix it properly. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.