Sinclair turning mandrels

[Jeffo1960]

Are the above mandrels in Carbide,worth the extra money over the Stainless Steel,.As they are .002 under bullet dia, thinking of using for neck tension on my 308 brass,thanks in advance

[Richard.S]

I use the Sinclair sizing mandrels and they don’t quite give me the neck tension I’m after. Will probably move to the turning mandrels myself. 

[Popsbengo]

34 minutes ago, Richard.S said:

I use the Sinclair sizing mandrels and they don’t quite give me the neck tension I’m after. Will probably move to the turning mandrels myself. 

Have you tried Century 21 mandrels? They come in 1/0th" increments and fit the Sinclair holder.

[Richard.S]

32 minutes ago, Popsbengo said:

Have you tried Century 21 mandrels? They come in 1/0th" increments and fit the Sinclair holder.

No I haven’t might have a look at that though cheers.

[jcampbellsmith]

3 hours ago, Popsbengo said:

Have you tried Century 21 mandrels? They fit the Sinclair holder.

+1

My 21st Century mandrels are 0.263, 0.2635, 0.264, etc. Very handy. 

Regards

JCS 

 

[Jeffo1960]

I have bought a sinclair turning mandrel, and 1 of 21st century to try and see how it goes