Dellboy Posted January 2, 2022 Report Share Posted January 2, 2022 A friend of mine has purchased a 410 and a 28bore for his other half and his 2 kids to get them into clay shooting and they are hooked . So is there an economical way to load them ? I did think the lee load all but it doesnt do 28 or 410 (thought they used too ) eventually they will upgrade to 20 and 12 bores but currently he is doing around 120 four ten and 60 28's a session is a mec 600 the only answer ? Quote Link to comment Share on other sites More sharing options...
Furyan Posted February 17, 2022 Report Share Posted February 17, 2022 You can just roll turn finish the cartridges The Mec 600 are OK But you can get a 3D printed tool set to fit the Lee load all for the 410 and it works quite well too be fair . Look up BELOW THE TIDE LINE on you-tube . When you/they upgrade to 20g the lee load all does the job just fine even for steel loads . If you need any load data or help with 410 data just PM me , I have non toxic loads for the 410 too in Steel . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.