John MH Posted November 20, 2021 Report Share Posted November 20, 2021 My V4 arrived on Monday and today was the first time I've had a chance to play with it. My first thoughts are that it is definitely an improvement over the V3 Throw and Trickler. It has a smaller footprint as now the slow trickler is combined and sits atop of the FZi. The adjustment of flow rates is easy with the App, the calibration feature sets the optimal flow rates for the large and small tubes and these can be further refined. The App tells you what the flow rate is and you can adjust for either greater speed or accuracy; the set point will be a compromise. You can also adjust the transition weight from large tube to small tube. he Adam recommends that anything that is +/- 0.02 of a grain of your target weight is more than acceptable (0.02 grains is about one kernel of powder). Quote Link to comment Share on other sites More sharing options...
DaveT Posted November 21, 2021 Report Share Posted November 21, 2021 Is that App an upgrade for the V3 version or a completely new one? IE can I run my current V3 alongside the V4? Quote Link to comment Share on other sites More sharing options...
John MH Posted November 21, 2021 Author Report Share Posted November 21, 2021 Yes The App will detect whether connected to a V3 or a V4, you can only connect to one at a time. Quote Link to comment Share on other sites More sharing options...
DaveT Posted November 21, 2021 Report Share Posted November 21, 2021 Or use 2 devices? Phone and tablet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.