Jeffo1960 Posted July 29, 2021 Report Share Posted July 29, 2021 Like to know your opinion on the above, in my 6.5 creedmoor, Lapua LRP, using RS 62, as considering, buying a 1000 Quote Link to comment Share on other sites More sharing options...
DaveT Posted July 30, 2021 Report Share Posted July 30, 2021 Superb bullet in my 260 to way past 1000 yards Quote Link to comment Share on other sites More sharing options...
20series Posted July 30, 2021 Report Share Posted July 30, 2021 Likewise running in a .260, excellent bullet. Although I use Vit160 Struggled to find any Lapua lately so if you've got a supply snatch them up.. Alan Quote Link to comment Share on other sites More sharing options...
SMLE Posted July 30, 2021 Report Share Posted July 30, 2021 All I use in my 6.5 creedmoor, great bullet to 1000 yards which is the furthest I’ve used them for. My Brass is Lapua small rifle primer, I use CCI 450 primers and RS62 exclusively and get on a typical 1000 yard shoot just under 1 moa grouping with my 24” 1:8 barrel. Quote Link to comment Share on other sites More sharing options...
geek Posted July 30, 2021 Report Share Posted July 30, 2021 This is my data which I posted in another thread: Subject to the usual caveat: this is my load, in my rifle, it may be unsafe in your rifle ! Proceed with usual caution. Ruger RPR (24 inch barrel): 139 Scenars, Federal primer, Hornady brass (but about to change to Lapua small primer), using 41.5 grs of Viht N160 Load testing as follows (all using 139 Scenars, Federal primer, Hornady brass, Viht N160): 41.0grs: 2536, 2596, 2592, = 2574.7ft/s at barrel; 41.5grs: 2616, 2612, 2616 = 2614.6ft/s at barrel (this was the most accurate load in my RPR); 42.0grs: 2587, 2634, 2636 = 2619ft/s at barrel 42.5grs: 2679, 2670, 2658 = 2669ft/s at barrel 43.0grs: 2700, 2683, 2695 = 2692.6ft/s at barrel 43.5grs: 2723, 2712, 2729, = 2721.3ft/s at barrel AI AT (26 inch barrel): 139 Scenars, Federal primer, Norma or Starline brass (large primer since my AI has the larger firing pin), using 43.6grs of Viht N160. Load testing as follows (all using 139 Scenars, Federal primer, Norma or Starline brass, Viht N160): 41.5grs: 1753, 1735, 1727, 1753, 1739, 1722, 1745, 1768, 1748, 1745ft/s = 1743.5ft/s at 600 yard electronic target; 42.5grs: 2722, 2701, 2707 = 2710ft/s at barrel; 43.6grs: 2789, 2776, 2782 = 2782ft/s at barrel; 43.6grs: 1655, 12689, 1667, 1657, 1689 = 1671.4ft/s at 800yard electronic target. Although, I have just bought 100 Lapua large primer cases, since I believe that they haven't been available too long. Both the above rifles are shot at distances between 200 - 1000 yards Quote Link to comment Share on other sites More sharing options...
Jeffo1960 Posted August 11, 2021 Author Report Share Posted August 11, 2021 Looking for advice on a start load for 139 Scenars using Lapua LR,CCI BR-2, with, RS62,as the RS load data seems a bit sketchy,so i am thinking of a start load of 41.5gr, Quote Link to comment Share on other sites More sharing options...
PhilM Posted August 17, 2021 Report Share Posted August 17, 2021 As per SMLE, They’re all I use in my 6.5CM AI AT. Yeah there’s better bullets ballistically, but they don’t shoot as well for me, and at 1000yds then shoot incredibly well (with the 136 Scenar L a close, but much more costly second). My load is Lapua SRP Brass, BR4 primers, 42gr H4350. Slowly working my way through a box of 1000 139Scenars, and think I’ll pick up another shortly. Quote Link to comment Share on other sites More sharing options...
Jeffo1960 Posted August 19, 2021 Author Report Share Posted August 19, 2021 Just tryed some of these so far very impressed got low SD and ES and going at 2767, using RS62 LRP, CCI Br2, can push them a lot faster as well, but got a good node, so going to try them out at distance soon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.