Richie88 Posted June 28, 2020 Report Share Posted June 28, 2020 Good evening all, I've been a long time follower of this forum and its proved really useful, so thank you for this. As the title suggests I've just purchased a Tikka Tac A1 in 6.5 Creedmoor (24"). I bought a pair of Tier One TAC 6 screw rings (high) but these are sitting extremely high. Can anyone suggest anything more suitable to marry my Nightforce 4-32x50 NX8 to the Tikka please? I know its difficult with the Tikkas extended picatinny...….. Thanks in advance Richie Quote Link to comment Share on other sites More sharing options...
mactavish Posted July 3, 2020 Report Share Posted July 3, 2020 . Quote Link to comment Share on other sites More sharing options...
Tim6.5crm Posted August 4, 2020 Report Share Posted August 4, 2020 ive just purchased the same and found the same problem (riser blocks)then lower mounts let me put one of my burris eliminators on hope that helps Quote Link to comment Share on other sites More sharing options...
Kevgun Posted August 5, 2020 Report Share Posted August 5, 2020 I used A Spuhr one piece mount with 20 Moa built in, this was on my IOR Crusader Scope with a 40mm tubem but other models are available, absolute top drawer stuff. Quote Link to comment Share on other sites More sharing options...
Andrew Posted August 5, 2020 Report Share Posted August 5, 2020 I used a Nightforce 20 MOA ring/base mount. Pricey but it took care of the mounting and lack of a 20 MOA rail all in one go. (About $300 US) ~Andrew Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.