Magneto speed chrono

[Dac9976]

Hi 

had issues with the above chrono. 
says “ bad connection with number 2 sensor” anyone else had this issue?

can it be repaired? Don’t fancy buying another one! 
 

cheers

Danny.

[Dazb1967]

I had the same issue, Can't remember exactly what it was but you need it sitting on the end of the barrel perfectly for it to read the results, Keep moving it about and you'll get there.

[Dazb1967]

Quick check online and number 2 sensor is saying it's not lined up properly, It does literally need to be perfect to work.

[Dac9976]

Thanks fellas.....will try again next week.

have to say it wasn’t this sensitive in the past!

cheers

Danny.

[38super]

On 3/2/2020 at 1:18 AM, Dazb1967 said:

Quick check online and number 2 sensor is saying it's not lined up properly, It does literally need to be perfect to work.

I've modded mine to work with suppressors and would say that "perfect" alignment is not, in my experience, necessary for consistent reading.

Have you looked at playing with the sensitivity settings. Then again, perhaps there is actually a bad electrical connection......

[Dac9976]

It seems I’ve struck the bayonet. Slight mark right at the end.

been advised that a v3 bayonet will fit the older V2.

first chrono I’ve ever shot..... probably not the last😂.

cheers

Danny.