jay666d Posted May 25, 2019 Report Share Posted May 25, 2019 For a long time now I have had a Nightforce scope with a stuck sunshade. At some point it took a whack and it managed to slip across its threads. The scope still works perfectly, but I decided recently that I just can't live with it like that anymore. So I decided to do something about it... I ain't no gunsmith, but here's an unedited, realtime video of how I removed the Sunshade from the scope! I hope that one day, it might help someone else out. Enjoy. Jay Quote Link to comment Share on other sites More sharing options...
17 squirrel Posted May 25, 2019 Report Share Posted May 25, 2019 Hi Jay I had the very same problem with a Nightforce scope. Tried strap wrench and all sorts. In the end I protected the lense as best I could with discs cut from an ice cream container and sponges. Turned the combi boiler to max, turned on the hot tap, restricted the flow till it was to hot to hold my hand under. Put the offending threads under for 2-3 minutes and sunshade came off a treat. I cleaned the threads put a little silicone grease on them and after a little work it now goes on and off as it should Quote Link to comment Share on other sites More sharing options...
jay666d Posted May 25, 2019 Author Report Share Posted May 25, 2019 Nice fix Squirrel! 👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.