GRS Bolthorn Folding Chassis for T3

[blackburnbuccaneer]

GRS Bolthorn Folding Chassis for Tikka T3 short action calibres (Standard length AICS so .204 - 300WSM)

The chassis handles very well and is very stable under recoil owing to its almost straight line recoil.

It, was originally bought as a fixed chassis about 2.5 years ago and has since had the folding hinge fitted at a cost of around £130 (fixed stock joint also included) with this fitted the stock locks up tightly when folded or open.

It has also been fitted with a custom made aluminum tubular rear bag rider made by David Bonwick of the Shooting Shed which cost around £80. This can be interchanged with the original rear picatinny rail.

The chassis will also come with two different cheek pieces made from Kydex one of which covered in neoprene, however it is currently fitted with the factory part. 

The full specification can be found here - https://www.grsriflestocks.com/models/grs-bolthorn

Other than slight wear of the anodising on the front picatinny rail where a bipod has been used and a small ~5mm scuff on the polymer forend the chassis is in almost new condition.

New with the folding hinge included this would cost around £1300 (Without the bag rider and extra cheek pieces) so I think £900 + Postage (ONO) is a fair price.

 

[DW58]

Bump ... ... ... 

[deanandrew64]

Are you interested in selling the joypod?

Thanks Dean

[blackburnbuccaneer]

I am afraid not, this is regarding the sale of the chassis only.

[blackburnbuccaneer]

Price reduced £900 + Postage