nearly there Posted February 23, 2016 Report Share Posted February 23, 2016 Hi guys looking for some advice.I have a fac sx3 and having a wee bit of a feed problem.sometimes when loading the magazine it's as if it's full IE won't let me insert any cartridges but if I try at a angle it works.is there a known issue with the sx3.thanks Link to comment Share on other sites More sharing options...
247sniper Posted February 23, 2016 Report Share Posted February 23, 2016 There is a lip or a burr in the mouth of the mag tube, its usually no aligned properly. Not a lot you can do unless you strip it and get to work on it. Ive done a couple but most people just live with it. Steve Link to comment Share on other sites More sharing options...
nearly there Posted February 23, 2016 Author Report Share Posted February 23, 2016 OK thanks,can you suggest a gun Smith who slicks up shotguns Link to comment Share on other sites More sharing options...
247sniper Posted February 23, 2016 Report Share Posted February 23, 2016 I would do it for you but it would be a hastle getting it over to me. Steve Link to comment Share on other sites More sharing options...
nearly there Posted February 24, 2016 Author Report Share Posted February 24, 2016 Hi Steve I appreciate the offer but as you said it be a fair bit of hassle. Link to comment Share on other sites More sharing options...
baldie Posted February 26, 2016 Report Share Posted February 26, 2016 This is a known fault with the SX3 and cannot be completely cured. Its the standard complaint that everyone has, I,ve worked on dozens of them, some respond better than others, but it never disappears completely. The best cure.....is a Benelli. Link to comment Share on other sites More sharing options...
nearly there Posted February 26, 2016 Author Report Share Posted February 26, 2016 Thanks baldie Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.