Condition1

Dragging this old thread up again. I can’t get RL16 anywhere so going to have to work up a new load. Was thinking for easy to find vit N-160 plenty of info around then I read about this N-555 i use 147 led-M but don’t even have a recipe for that not that much of an issue I can work up but I like to have a baseline can’t find any recipes or people having experience with it with 147, So just go with N-160?

Very nice if only I’d got round to adding a slot but I procrastinated. Good luck

Good luck with sale that’s a grail gun of mine

Arrived perfect thanks

Hi. I’ll take this please if not already gone

If he isn’t I am I’ve been looking for a while.

That’s great. As to the ops question a more local option I could use occasionally would be right up my street.

Doncaster my club is no long nra affiliated so I can no longer shoot at strensall where we used to with a scc. however had a few replies to my question it looks like joining the nra is the way to go

Yes range fees are fine. Surprisingly reasonable. we’d only want scoped rifle for long range probably possible iron sights for me and my lever actions to shoot further out maybe so might add that. . We have access to everything else including target shotgun whenever we want do probably wouldn’t take that long drive for anything else. thanks again looks like it will suit us fine.

Thanks for the replies I’ve just downloaded their application form Yes im guessing the scc training is this Thanks Roy, yes I’ll ring again tomorrow. Yes £35 is a lot more reasonable. ( I’m not just tight covid had hit finances quite a bit) oh belive me I know how much this hobby costs. Well I do now since I actually had to work out how much I was spending that would be great if that’s all it costs for us to get access a few times a year. Perfectly acceptable in fact seems a bargain.

Thanks for the replies very much appreciated. I’ve just downloaded their application form im guessing the scc training is this assessment fee they mention below Which seems a bit steep. not sure how many times I have to prove I’m safe, from above they won’t even take into account my PSA membership or membership of two clubs I had to do probation for as proof I’ll not shoot my foot off. Up until 2018 I was paying £10 for the scc. oh well it is what it is. Not too bad I suppose over all. I dint think my mates will want to spend that much but I will pass on the info to them.

Hi, I’ve just posted a question about bisley. But to answer your question yes I’m looking for somewhere to shoot at longer ranges there are a few of us stuck at 100m now. 700 would be great 1k even better. somewhere I could pay and play at 700 without being a member or needing an scc and all that entails probation etc would be what I wanted. no idea if that’s possible

Oh and I meant to ask are there any other options to shoot long range other than bisley. Bisley is around three hours away which don’t mind I drive all day anyway.

Hi, \I’ll try and be brief. Our club is no longer nra affiliated so I can no longer get a scc ( we used to shoot at strensall ) occasionally. Im a member of two clubs the other isn’t either. I’m stuck at 100 meters. A few of us would like to reach out further, I personally would like electronic targets or at least steel, hanging around in the butts got real boring real quick. Bisley would seem to be a good idea. so I need to join the NRA at £88 a year. Ok not too bad. Spoke with a very helpful lady today but I’m a bit dense so your help would be appreciated. she said I could get an scc once I was a member of the nra, but is there a probation period like other clubs? how do I get a scc from bisley will I need to take a course or something? once I have an scc can I just rent an electronic lane for a morning 1200 that 3 or 4 of us can share? thanks in advance I’ve never been there but it seems perfect. Just unsure of how it work. Website confused me, please use small words

hi, I have a fenix 6, I’ve searched but can’t find it to upload to my watch, can you let me know where you found it. thanks never mind just found it. Cheers

Yes, you would need both. Not sure if the controller has a timer. If it does buying both of those might work. not an expert one these was just looking to see if I could see a very cheap alternative. Not quite cheep enough for me though. but if you look around that site you can just basically get the board for 20 quid.

this any good? https://www.aliexpress.com/item/33000269836.html?spm=a2g0o.detail.100009.5.25253ff0l5UnoH&gps-id=pcDetailLeftTopSell&scm=1007.13482.95643.0&scm_id=1007.13482.95643.0&scm-url=1007.13482.95643.0&pvid=04e41ff0-7712-4697-871c-b669b80e3fb2&_t=gps-id:pcDetailLeftTopSell,scm-url:1007.13482.95643.0,pvid:04e41ff0-7712-4697-871c-b669b80e3fb2,tpp_buckets:668%230%23131923%2380_668%23888%233325%237_668%232846%238107%231934_668%232717%237564%23609_668%231000022185%231000066059%230_668%233480%2315683%23320 https://www.aliexpress.com/item/33052393031.html?spm=a2g0o.detail.1000014.51.48c04d54zDLU8g&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.14976.207170.0&scm_id=1007.14976.207170.0&scm-url=1007.14976.207170.0&pvid=bba9495d-4dba-4088-beed-df6604b1f589&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.14976.207170.0,pvid:bba9495d-4dba-4088-beed-df6604b1f589,tpp_buckets:668%230%23131923%2368_668%23888%233325%237_4976%230%23207170%2315_4976%232711%237538%23296_4976%233104%239653%233_4976%234052%2321620%2391_4976%233141%239887%231_668%232846%238107%231934_668%232717%237564%23609_668%231000022185%231000066059%230_668%233422%2315392%23803_4452%230%23194213%230_4452%233474%2315675%23352_4452%234862%2322449%23443_4452%233098%239624%23945_4452%233564%2316062%23995

Thanks I’ll take a look

getting quite complicated now and probably down to a level I don’t have the stamina for. I’d probably start losing track going into this much detail. But baby steps, I’ll experiment with die insertion or maybe she’ll holders. I have never annealed, don’t really want to start as it looks expensive and more time consuming. we are probably heading into the realms of diminishing returns for my application. I don’t compete or anything, I shoot for fun, I do enjoy my bolt actions and plan to shoot more this year with them but PSG and lever actions take a lot of time.

That makes sense also. Yes pretty simple.

yes it does, thanks, makes sense Hornady match I think they are. Yes I’ve found the part numbers. I just need to measure my brass to work out was bushing I need.

ok, lots talking about bumping the the shoulder back. How would one do that? I take it I’d wind the die back further from the case holder, but how far? to be honest, I can’t be doing much wrong, I’ve been shooting the same brass many many times, it’s still going strong. In my 308 it groups very well probably more by chance than anything else. I need to spend time working a load for my 6.5. Although it’s performed well at 600 meters groups not great at 100. Not as good as my 308 anyway. So I need to experiment. I have a fancy match die for that but didn’t realise you had to buy a separate part for the neck tensions so I keep using my cheap Lee die. I suppose I need to look there first before I look into bumping shoulders.

Ball are outstanding watches. little known outside of watch enthusiasts though. I used to collect watches before I collected guns

Hmmm that martini henry, intake it it will still be safe to shoot if you can reload for it?

I’ll take that as a don’t do it then