Scotch_egg Posted January 25, 2010 Report Share Posted January 25, 2010 Does any one know what height rings I will need for a Lawton 7500 action with a nightforce 56mm objective lens? cheers Dave Link to comment Share on other sites More sharing options...
baldie Posted January 25, 2010 Report Share Posted January 25, 2010 Not high , as the rail is already high. I will let you know soon, as mine should be finished tomorrow, and its having a 50 mil leup on it for the immediate future. I think i will actually get away with medium mounts. Link to comment Share on other sites More sharing options...
Scotch_egg Posted January 25, 2010 Author Report Share Posted January 25, 2010 Dave, is that with the syss stainless rail or the lawton? Still not got the rails yet, I was waiting for the syss stainless jobby. cheers Dave Link to comment Share on other sites More sharing options...
baldie Posted January 25, 2010 Report Share Posted January 25, 2010 The rails are finished Dave....i have one in my hand right now, ready to go on the mill. They need a small amount removing from the rear, dependant on the action, as there are differences. The rail is the same height as the original. If i could have gotten to the man that made them quicker, they would have been lower. Rog sent them in. Contact Andy, and i will sort him out with them. Link to comment Share on other sites More sharing options...
Scotch_egg Posted January 25, 2010 Author Report Share Posted January 25, 2010 cheers buddy, just let me know if the mediums fit in the morning so I can get them ordered. Dave Link to comment Share on other sites More sharing options...
baldie Posted January 26, 2010 Report Share Posted January 26, 2010 Medium rings will fit with my leup, but you could be pushing it with a 56 mil front end....its too close to call. Difficult to say, as one medium ring isn,t as "medium" as another. The rings i have are b-square ones. They were on the leup, and will have to do until i turn some badgers up etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.