bigfox Posted July 7, 2019 Report Share Posted July 7, 2019 does anyone have any experience of fixing Dragonfly ir to older firefly mount ? all help greatly appreciated Quote Link to comment Share on other sites More sharing options...
ergid Posted July 17, 2019 Report Share Posted July 17, 2019 Can you put up some picks I might be able to help, Quote Link to comment Share on other sites More sharing options...
Eric the Red Posted July 17, 2019 Report Share Posted July 17, 2019 Does not feel an easy fix and furthermore will limit the ability to adjust the Dragonfly to the centre of the crosshair. The Firefly had it built into the lens, the Dragonfly requires a windage and elevation adjustable mount. are you looking to mount picatinny or more on the old dovetail type approach with the screwthread? Quote Link to comment Share on other sites More sharing options...
Eric the Red Posted July 17, 2019 Report Share Posted July 17, 2019 If the latter I'd be more inclined to attach a piece of picatinny using that mounting hole and a nut - and then go with a W/E adjustable mount, over trying to frig an old Firefly mount...... Quote Link to comment Share on other sites More sharing options...
Richiew Posted July 17, 2019 Report Share Posted July 17, 2019 Hi there l cit down a piece of Picatinny rail with a suitable hole in it , put double sided strong sticky tape on it then stuck it to top of the archer . Then found and trimmed an Allen bolt to make all secure . Adjustable mount on the IR Torch from night master works great . Hope this gives some ideas cheers Quote Link to comment Share on other sites More sharing options...
bigfox Posted July 21, 2019 Author Report Share Posted July 21, 2019 Hi all thank you all for your reply’s had a picanny rail milled and screw but cannot get picture to load but thank you all again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.