No i deer Posted April 7, 2019 Report Share Posted April 7, 2019 Made a zero stop for my vortex golden eagle. Got myself 2 circlips off eBay slightly bigger than the width of the turret,both together add up just a little shy of the bottom of the turret to top of the scope measurement. I squeezed them up a bit to reduce the diameter.took the turret off. Put on the circlips tight to the scope with circlip pliers. Put turret back on to its zero position, dial up and back down and it goes about 2 minutes past zero. I could move the clips up to touch bottom of the turret end and they could stop bang on zero if I wanted but as it's a range gun it doesn't matter. Quote Link to comment Share on other sites More sharing options...
One on top of two Posted April 7, 2019 Report Share Posted April 7, 2019 love it ! Simple yet brilliant 👍 Quote Link to comment Share on other sites More sharing options...
Woodlander Posted May 4, 2019 Report Share Posted May 4, 2019 Nice one, like the fibre washer zero stop for a NXS. Quote Link to comment Share on other sites More sharing options...
No i deer Posted May 6, 2019 Author Report Share Posted May 6, 2019 I'm not familiar with the nightforce scopes zero stops. Quote Link to comment Share on other sites More sharing options...
Chanonry Posted May 6, 2019 Report Share Posted May 6, 2019 Play the innocent if you want, you are not going to get the patent 😀 Quote Link to comment Share on other sites More sharing options...
No i deer Posted May 6, 2019 Author Report Share Posted May 6, 2019 The only scope I've had with a zero stop is a vortex. I previously made a zero stop for my 32 mag sightron by using the retaining ring from a coke bottle,works click perfect 😁.It's on here in this section somewhere. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.