skany Posted February 26, 2019 Report Share Posted February 26, 2019 Hi guys l After years of badgering I have bought my PH M84 back (waiting on FAC variation) I am looking at running a 34mm tube this time & would like a one piece base,could anyone point me in the right direction (I had 2x bases made up last time but would rather just purchase something off the shelf if it exists lol) 20moa would be nice but I could live with a flat rail I think I believe it has the same action top as a M87 if memory serves me. Any help would be appreciated 🙂 Kind regards Andy Link to comment Share on other sites More sharing options...
skany Posted February 27, 2019 Author Report Share Posted February 27, 2019 Not many PH users on here these days then 🤣 Link to comment Share on other sites More sharing options...
GeorgeB Posted February 27, 2019 Report Share Posted February 27, 2019 Suggest you contact Norman Clark Gunsmiths if you haven't already. Link to comment Share on other sites More sharing options...
snakeman Posted February 27, 2019 Report Share Posted February 27, 2019 I phoned these; http://www.egwguns.com/m98-commercial-large-ring/ and discussed my requirements - found them a great source of help Then purchased an EGW rail through MidwayUK when the website was still operating. Received rail in 10 days without problems and perfect fit ATB Link to comment Share on other sites More sharing options...
SMLE Posted February 28, 2019 Report Share Posted February 28, 2019 Norman Clark’s is THE place to go for PH advice and work Link to comment Share on other sites More sharing options...
skany Posted March 10, 2019 Author Report Share Posted March 10, 2019 Cheers guys Nc didn't have them when i enquired when I originally had the rifle years ago unfortunately. Snake man That was a flat bottomed m84 rail?if so thanks good info I'll give them a shout:-) Regards Andy Link to comment Share on other sites More sharing options...
Reecy Posted March 10, 2019 Report Share Posted March 10, 2019 Skany i think I can help you out, I have an M85 base that I modded a long time back to take a piccatinny rail. send me your email addy and I will dig it out and send you some piccies atb Reecy Link to comment Share on other sites More sharing options...
skany Posted March 12, 2019 Author Report Share Posted March 12, 2019 On 3/10/2019 at 11:06 PM, Reecy said: Skany i think I can help you out, I have an M85 base that I modded a long time back to take a piccatinny rail. send me your email addy and I will dig it out and send you some piccies atb Reecy Hi reecy Thank you but the action top is different on the m84 so wouldn't fit (a m87 or m83 would be the same I think) Cheers And Link to comment Share on other sites More sharing options...
Reecy Posted March 12, 2019 Report Share Posted March 12, 2019 Skany you are right the receiver top is different on the M84, you could just get a smith to fit a piccatinny rail directly onto the receiver and you're sorted atb reecy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.