Novice1 Posted February 14, 2019 Report Share Posted February 14, 2019 Can anyone give me some pointers on a suitable maintenance regime for a trigger mechanism? Looks to be a little crud building up in my t3 trigger housing. Cheers Link to comment Share on other sites More sharing options...
Moorlander Posted February 14, 2019 Report Share Posted February 14, 2019 If its full of crap blast it out with brake cleaner , then re lube with WD 40 , (AI recommend WD40 for triggers ) , Test thoroughly before using live ammo. Link to comment Share on other sites More sharing options...
Re-Pete Posted February 14, 2019 Report Share Posted February 14, 2019 Get an aerosol can of brake cleaner, remove trigger assy, wash through repeatedly until squeaky clean, allow to dry completely, then give a squirt of a dry lube such as : https://www.amazon.co.uk/44172-WD40-Professional-Lubricant-400ml/dp/B006A8JEUS allow to dry and re-assemble. Pete Link to comment Share on other sites More sharing options...
Leeman Posted February 14, 2019 Report Share Posted February 14, 2019 Dunking them in lighter fluid every so often used to be the recommendation. I use Zippo lighter fluid available on ebay for not much money. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.