Nfarmer Posted February 3, 2019 Report Share Posted February 3, 2019 Prusa i3 MK2.5 This combines the best features of the MK3 at a very affordable cost. In addition to the standard MK2S features this printer has the magnetic bed with spring steel sheet, whole new extruder head with Bondtech Extruder Gears and Noctua fans and also the P.I.N.D.A. 2 bed leveling sensor and filament sensor. This printer can be seen working and will come with sufficient PLA/PETG filament to get you started. Collection only please £600 TECHNICAL SPECIFICATIONS MK2S 31% bigger build volume - 10,500 cm3 (25 x 21 x 20 cm or 9.84 x 8.3 x 8 in) Open frame design for easy use Integrated LCD and SD card controller (8GB included) Up to 40% faster printing thanks to the genuine E3D V6 Full hotend 0.4mm nozzle (easily changeable) for 1.75 mm filament Layer height from 50 microns Automatic mesh bed levelling Automatic skew axes compensation Heatbed with cold corners compensation - for warpless 3D printing from any material Hassle free PEI print surface - no glass, no glue, no ABS juice Supported materials – PLA, ABS, PET, HIPS, Flex PP, Ninjaflex, Laywood, Laybrick, Nylon, Bamboofill, Bronzefill, ASA, T-Glase, Carbon-fibers enhanced filaments, Polycarbonates... Easy multicolor printing Average power consumption 70 W (printing PLA) or 100 W (printing ABS), exterior dimensions 42 x 42 x 38 cm (16.5 x 16.5 x 15 inches), weight 6,5 kg (14 lbs), CE certification Specially optimized firmware for quiet printing MK2S to MK2.5 Upgrade kit contains: Magnetic MK52 Heatbed (12V) with smooth pei spring steel print sheet Bondtech extruder gears Filament Sensor P.I.N.D.A 2 with thermistor Noctua fan 5v Video of it in action. https://flic.kr/p/2bSAcpg This item is collection only and no returns will be accepted Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.