Madhatter Posted January 16, 2019 Report Share Posted January 16, 2019 Is anyone using one of these pads? I could do with some advice regarding filling with sand: - do I fill all 4 pads? and should I use heavy sand, ordinary sand or another medium Thanks Link to comment Share on other sites More sharing options...
justin credible Posted January 16, 2019 Report Share Posted January 16, 2019 You really only need to fill the 2 outer pockets with sand. Any sand is fine and only fill them about half full so that your bipod runners are able to track nicely in them rather than sliding about on the top of them if you understand what I mean. Link to comment Share on other sites More sharing options...
Brillo Posted January 18, 2019 Report Share Posted January 18, 2019 Justin’s spot on. There’s no point in filling the middle two, it achieves nothing. I came to the conclusion that it part of the design to hold the outer two in the correct position and so it folds neatly into one piece. If you fully fill the outer two it’s difficult to get them flat so a partial fill is much better. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.