RAW Posted January 11, 2019 Report Share Posted January 11, 2019 Hi Just wanting to know what primers you are using with 139 grn scenars in. 260 and getting great results with? Cheers Link to comment Share on other sites More sharing options...
DaveT Posted January 11, 2019 Report Share Posted January 11, 2019 CCI brs Muroms reduce ES but need careful and deep seating or else you will get failures on first firing where firing pin finishes incomplete seating. Not sure about future supplies due to sanctions on Russia. Link to comment Share on other sites More sharing options...
TJC Posted January 11, 2019 Report Share Posted January 11, 2019 CCI LR 200. Haven’t had a single issue and rarely have ES worse than 6 FPS and I can’t reload for toffee. Link to comment Share on other sites More sharing options...
Re-Pete Posted January 11, 2019 Report Share Posted January 11, 2019 + 1 for Murom KVB-223M primers in 308, 223, 6BR, 6x47, and 6.5x47....................bought a carton of 5000 from HPS-TR a few months ago. (since the sanctions) Pete Link to comment Share on other sites More sharing options...
bradders Posted January 11, 2019 Report Share Posted January 11, 2019 1 minute ago, Re-Pete said: + 1 for Murom KVB-223M primers in 308, 223, 6BR, 6x47, and 6.5x47....................bought a carton of 5000 from HPS-TR a few months ago. (since the sanctions) Pete Do you put tape round them to make them fit, or do you glue them in? Link to comment Share on other sites More sharing options...
RAW Posted January 11, 2019 Author Report Share Posted January 11, 2019 Ok Cheers folks Link to comment Share on other sites More sharing options...
Re-Pete Posted January 11, 2019 Report Share Posted January 11, 2019 Bradders said: " Do you put tape round them to make them fit, or do you glue them in? ".................. Huh? I chuck the cases when they won't stay in by themselves............. Pete Link to comment Share on other sites More sharing options...
bradders Posted January 11, 2019 Report Share Posted January 11, 2019 KVB-223M's are small rifle primers....unless all your brass is SRP then maybe o'rings are req'd 🤔 Link to comment Share on other sites More sharing options...
Xtrema Posted January 12, 2019 Report Share Posted January 12, 2019 CCI 200 primers have never let me down. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.