mole trapper Report post Posted March 10, 2018 Evening all. I'm about to pick up my first .223, I've had and have various centrefires, but never this one before. I seem to remember reading somewhere recently that the barrel needs regular fussy cleaning or accuracy becomes a problem similar to the hmr. Is this correct? My 22-250 really seems quite indifferent to it. Share this post Link to post Share on other sites
onehole Report post Posted March 10, 2018 Your close to home!!![I,m in WB},,,,,,,,223 no different to anything else really,,,,,enjoy!!,,,,,,,,,,,O Share this post Link to post Share on other sites
VarmLR Report post Posted March 11, 2018 223 isn't any more fussy imho than my 6.5 or .308. Depends on the barrel, what bullets are used and what propellants are used. If you shoot clean burning single base like Viht N133, a de-carbon using KG1 after each outing is generally all you need in between de-coppering which I do on mine every 75 rounds. The accuracy starts dropping off with mine if left much longer. Make sure to use a decent bore guide and one piece rod. KG1 I've found to be the best of the carbon removing chemicals that doesn't contain anything too nasty or aggressive. Also ensure that you clean bolt lug recesses and swab chamber out. You can use an old toothbrush to clean lug recess or buy something like the Sinclair bolt recess and action cleaning kit. Share this post Link to post Share on other sites
Andrew Report post Posted March 11, 2018 Clean as little as possible. I only clean my barrel if I get debris in it. Chamber and action are cleaned more frequently.~Andrew Share this post Link to post Share on other sites
mole trapper Report post Posted March 12, 2018 Some great feedback thank you gents. In the bigger rifles I've only used bore snakes periodically. However I do have proper cleaning kit here somewhere. Share this post Link to post Share on other sites
17 Rem Report post Posted March 13, 2018 Why would you not clean it after every outing? Remind me never to buy a used rifle from you, please. Share this post Link to post Share on other sites
bradders Report post Posted March 13, 2018 24 minutes ago, 17 Rem said: Why would you not clean it after every outing? Remind me never to buy a used rifle from you, please. Share this post Link to post Share on other sites
geek Report post Posted March 14, 2018 15 hours ago, 17 Rem said: Why would you not clean it after every outing? I would ask the same question? I always clean all my firearms (rifle and shotgun) after use, irrespective of the rounds shot. Each to their own, I suppose. Share this post Link to post Share on other sites
Andrew Report post Posted March 14, 2018 17 hours ago, bradders said: I'll second that.~Andrew Share this post Link to post Share on other sites
Kalahari Report post Posted March 14, 2018 I don't think you get the opportunity to buy a rifle from Andrew. His rifle collection is purely one way!!!! David. Share this post Link to post Share on other sites
17 Rem Report post Posted March 14, 2018 8 hours ago, geek said: I would ask the same question? I always clean all my firearms (rifle and shotgun) after use, irrespective of the rounds shot. Each to their own, I suppose. Indeed. So many used rifles are pitted through neglect, I am just bemused that people don’t bother. Pushing a patch with some solvent on it through a bore really isn’t that hard. Share this post Link to post Share on other sites
Andrew Report post Posted March 14, 2018 2 hours ago, Kalahari said: I don't think you get the opportunity to buy a rifle from Andrew. His rifle collection is purely one way!!!! David. You're probably right.~Andrew Share this post Link to post Share on other sites
mole trapper Report post Posted March 22, 2018 Anyways, bitching aside. I picked up the howa today, cleaned the barrel before putting a round through it. Wasn't actually necessary as it was clean as a whistle. With hornandy 40 grn vmax clover leaf groups easily achieved at 100 yds, however I decided to try some Norma 50,s again vmax heads, these did not group half as well so I went back to the hornandy, now it would only produce touching groups but nearer to an inch. Gave the barrel a good run through with the brush and solvent and plenty of patches, I will see if things are back to clover leaf tomorrow with the hornandy. Share this post Link to post Share on other sites
palo Report post Posted March 22, 2018 You should always clean your barrel when switching from one brand of ammo to another. Share this post Link to post Share on other sites
cooter Report post Posted April 4, 2018 On 3/22/2018 at 9:31 PM, mole trapper said: Anyways, bitching aside. I picked up the howa today, cleaned the barrel before putting a round through it. Wasn't actually necessary as it was clean as a whistle. With hornandy 40 grn vmax clover leaf groups easily achieved at 100 yds, however I decided to try some Norma 50,s again vmax heads, these did not group half as well so I went back to the hornandy, now it would only produce touching groups but nearer to an inch. Gave the barrel a good run through with the brush and solvent and plenty of patches, I will see if things are back to clover leaf tomorrow with the hornandy. Was it a new rifle and did you run it in? Share this post Link to post Share on other sites
VarmLR Report post Posted April 4, 2018 On 22/03/2018 at 9:48 PM, palo said: You should always clean your barrel when switching from one brand of ammo to another. ??? If I fired 10 rounds of Vmax down my freshly cleaned barrel and then switched to TMKs, I'd feel no compunction to touch the barrel as I'm sure it doesn't know, or care for that matter, what I'm firing down it. I clean routinely after each outing as I always have, but "outing" for me is anything from 1 to 75 rounds. Why would you want to clean after switching ammo if you've a box or less down the barrel? Share this post Link to post Share on other sites