Stiller actions

[lee w 118]

To all gun gurus on ukv will this action fit in my HABU  chassis, no cutting wanted ,is it straight forward drop in,many thanks Lee. Its a .22  rimfire stiller 

[TWG1]

The action is a rem clone so it will match the profile of anything rem profile, the issue you will have is the angle of the mag from memory and putting it crudely the end of the mag will be positioned roughly on the front of where the floor-plate would sit on a conventional stock set up . So you will probably need to have the front of the mag well machined.

Keith

 

 

[lee w 118]

Thanks keith Atb Lee

[lee w 118]

Hi keith can you email me please thanks Lee

[terryh]

21 hours ago, TWG1 said:

The action is a rem clone so it will match the profile of anything rem profile, the issue you will have is the angle of the mag from memory and putting it crudely the end of the mag will be positioned roughly on the front of where the floor-plate would sit on a conventional stock set up . So you will probably need to have the front of the mag well machined.

Keith

 

 

Just found this while mating an Annie MPR into a stock designed for a Rem 700; need to mill a slot back from the front action bolt ‘hole’ in the bottom metal to clear the curved 22rf mag.

T

[lee w 118]

Thanks terry much appreciated, HABU excepts Aics mags but it might not work as for mag on the piss,if you no what i mean and as i have said dont want to machine mag well,thanks

Atb Lee