levelplaying Posted February 2, 2018 Report Share Posted February 2, 2018 I am about to take possession of a sphur mount with a built in 20 moa. Rifle has a 20 moa rail. Would I be able to zero down to 100 yards using an IOR crusader or would I be better off to change the rail and if so what would you recommend for the sphur. Appreciate your views Link to comment Share on other sites More sharing options...
OSOK Posted February 2, 2018 Report Share Posted February 2, 2018 As a guide you’ll loose half of the scopes moa when zeroed at 100 yards so as long as the crusader has more than 80 moa you’ll be fine . My Terminator has 100 moa so I’m sure yours has at least the same if not more ? OSOK Link to comment Share on other sites More sharing options...
Villadave59 Posted February 2, 2018 Report Share Posted February 2, 2018 Hi, I have a Steiner M5XI 5-25 as supplied there is no provision for downward adjustments, Steiner recommend total of 45 moa mounting to allow full range of 26mil elevation, I use a spuhr "0" moa mount my rifle has 20 moa rail which cuts my elevation to approx 16 mil, which for distances /I shoot is ok but for very long distances I would need the extra slope from the mount ,not sure if this helps as not familiar with your scope , I went with this mount for AI in 308 as advised by sporting services cheers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.