Cienfuegos Posted January 29, 2018 Report Share Posted January 29, 2018 Some experience in changing barrels with Keppeler. Is it complicated, can it be disassembled and easily changed? Link to comment Share on other sites More sharing options...
Bianchi Posted January 29, 2018 Report Share Posted January 29, 2018 I have observed how the barrel is removed at Keppeler.’s premises. The barrel is fastened in a vice and a piece of copper bus bar is inserted into the action’s ejection port. A hammer does the rest. The sides of the multiple locking lugs are probably too small for an action wrench. Link to comment Share on other sites More sharing options...
Cienfuegos Posted January 30, 2018 Author Report Share Posted January 30, 2018 Thank you ... it has been a great help ... Link to comment Share on other sites More sharing options...
tecuani Posted January 31, 2018 Report Share Posted January 31, 2018 It is not difficult, same here fix the barrel in a vise. Since I have a square action I use a wrench, goes without saying, I protect the action for damage with either leather or felt. However, doing it yourself, since it is not a switch barrel system (or any other reference to fit) you need to keep headspace in mind. Regards, Tec Link to comment Share on other sites More sharing options...
Cienfuegos Posted February 7, 2018 Author Report Share Posted February 7, 2018 Tengo el go y no go... jejeje Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.