MarkR Posted January 20, 2018 Report Share Posted January 20, 2018 Dear All I have a S&B 3-20x50 PM II Ultra Short LP which has the Small (hight) Turret which I think is commonly called the "German" Turret, please see picture. To adjust the scope's elevation when zeroing, there are two small grub screws at 90 degrees to each other which you undo, you then unlock the turret by lifting the turret lock, and then move the outer ring accordingly. Could more knowledgeable members, please inform me if after following the previous instructions, should the inner part of the turret (engraved with the red locked), also rotate or stand still? Regards MarkR Link to comment Share on other sites More sharing options...
MarkR Posted February 10, 2018 Author Report Share Posted February 10, 2018 Dear All Just to follow up my previous posting, I can now confirm that after unlocking the two small grub screws, the whole Turret (including the inner part engraved with the red "Locked") rotates together when you are zeroing the Turret to your Rifle. The small grub screws disengage the outer (engraved) part of the Turret from it's internal workings to allow the adjustments to happen. Regards MarkR Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.