stephentri Posted January 2, 2018 Report Share Posted January 2, 2018 Number A B C D E F Description R1 23,24,26,28,33 1.24 0.79 2.20 2.35 0.95 Varmint R2 22,24,26 1.24 0.67 2.20 2.35 0.95 Varmint Lightweight R3 22,24 1.18 0.66 1.12 10.0 0.70 Sporter R4 26 1.24 0.83 2.2 2.35 0.95 PSS Hi could anyone please explain to me were the measurements are taken from on the barrel I can figure out A is the length and C is the end ,also would anyone know the weight and the difference in weight between lightweight varmint and varmint both finished at 24 inches. Thanks Link to comment Share on other sites More sharing options...
PaulC Posted January 2, 2018 Report Share Posted January 2, 2018 My guess would be F at the action and C at the muzzle Link to comment Share on other sites More sharing options...
terryh Posted January 2, 2018 Report Share Posted January 2, 2018 If you could post who’s table it was then it might help, but here’s my guess: B diameter of tennon D length of tennon after that you’re on your own ? Link to comment Share on other sites More sharing options...
terryh Posted January 2, 2018 Report Share Posted January 2, 2018 Just found that this is the Border barrel profiles page, bit naff , most barrel makers give a nice drawing that then makes sense of the dimensions and remove ambiguity thus: http://benchmark-barrels.com/Benchmark_Barrels/Benchmark_Barrels_-_Contours.html Terry Link to comment Share on other sites More sharing options...
Catch-22 Posted January 2, 2018 Report Share Posted January 2, 2018 It's Border Barrels, specifically their 'swamped barrel' countours. It would help if they aided customers with a diagram - everyone else does! Link to comment Share on other sites More sharing options...
Catch-22 Posted January 2, 2018 Report Share Posted January 2, 2018 Ha - beat me to it Link to comment Share on other sites More sharing options...
stephentri Posted January 2, 2018 Author Report Share Posted January 2, 2018 The table is from border barrels hope this helps Link to comment Share on other sites More sharing options...
treetop Posted January 2, 2018 Report Share Posted January 2, 2018 Email them & they will send you the diagram you are after .. if if you search the net, you will find it , but here it is Link to comment Share on other sites More sharing options...
terryh Posted January 2, 2018 Report Share Posted January 2, 2018 You should not have to ‘go search’, but it’s not my company so not really my place to comment I suppose? Link to comment Share on other sites More sharing options...
stephentri Posted January 3, 2018 Author Report Share Posted January 3, 2018 On the border barrels chart would the R1 be the equivalent of the Remington sendero profile. Link to comment Share on other sites More sharing options...
Lynx Posted January 30, 2018 Report Share Posted January 30, 2018 On 1/3/2018 at 7:20 PM, stephentri said: On the border barrels chart would the R1 be the equivalent of the Remington sendero profile. Stephen, Its R4, Sendero profile has muzzle dia of .830”. http://www.shilen.com/contours.html Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.