pengo Posted November 4, 2017 Report Share Posted November 4, 2017 Hi there, Can anyone tell me if there is a SAAMI Spec sheet for the 6.5x47 Lapua, please? I've tried to find it on their website without any success, so I would appreciate it if someone can post a link to it, if such a thing is out there. Many thanks in advance for your help. Cheers Paul Link to comment Share on other sites More sharing options...
Laurie Posted November 4, 2017 Report Share Posted November 4, 2017 Probably not as it is a CIP registered and regulated design and no US manufacturer makes either cases or cartridges. (In fact, nobody anywhere other than Lapua does so.) Link to comment Share on other sites More sharing options...
Ronin Posted November 5, 2017 Report Share Posted November 5, 2017 There were some documents on the web relating to SAAMI and CIP spec of all chambers. A little research may locate them if you try. You could also contact Pacific Tool and Guage and ask for reamer prints of the chamber you want, they usually oblige within a few hours. Link to comment Share on other sites More sharing options...
henryo Posted November 5, 2017 Report Share Posted November 5, 2017 There is a drawing here: http://accurateshooter.net/Blog/65x47diagram.pdf Link to comment Share on other sites More sharing options...
pengo Posted November 5, 2017 Author Report Share Posted November 5, 2017 Thank you to everyone for their help and henryo for the drawing. This will at least enable me to work with a measurement to trim to. Cheers Paul Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.