TWG1 Posted October 15, 2017 Report Share Posted October 15, 2017 Thought I would post this on here as I cant put it on the showcase section , by way of a thank you to Paddy (Dane &Co) a bit of a collaboration but he did the hard work A departure from my usual stiller actions as i wanted this to be a switch barrel with one of the Calibers in the future being 6 BR and one 7 SAUM so Big Horn the way to go, with the controlled feed and the ability to change the bolt head. So this is 6.5 CM with a 22'' proof barrel , carbon Manners stock, Big Horn Action. Link to comment Share on other sites More sharing options...
trucraft Posted October 15, 2017 Report Share Posted October 15, 2017 Said it before, really lovely rifle. What does it weigh as is? Are they American Rifle M10 mounts? Link to comment Share on other sites More sharing options...
gun nut Posted October 15, 2017 Report Share Posted October 15, 2017 Interesting spec Keith, just put a 3-24×52 March on it now and it'd be perfect! Rgds Mike Link to comment Share on other sites More sharing options...
TWG1 Posted October 15, 2017 Author Report Share Posted October 15, 2017 Said it before, really lovely rifle. What does it weigh as is? Are they American Rifle M10 mounts? Not weighed it without the scope, you have me curious now will weigh it later. They are the American Rifle mounts. Keith Link to comment Share on other sites More sharing options...
TWG1 Posted October 15, 2017 Author Report Share Posted October 15, 2017 Interesting spec Keith, just put a 3-24×52 March on it now and it'd be perfect! Rgds Mike I actually looked at one, but the nightforce was significantly cheaper. Keith Link to comment Share on other sites More sharing options...
TWG1 Posted October 15, 2017 Author Report Share Posted October 15, 2017 Said it before, really lovely rifle. What does it weigh as is? Are they American Rifle M10 mounts? Bare rifle no scope rings etc 8 pound 6oz , Keith Link to comment Share on other sites More sharing options...
trucraft Posted October 15, 2017 Report Share Posted October 15, 2017 Bare rifle no scope rings etc 8 pound 6oz , Keith Nice! So prob around 12 with scope and atlas. Are the mounts available over here? Always like your rigs, we have similar taste in rifle components I feel Keith. Link to comment Share on other sites More sharing options...
TWG1 Posted October 15, 2017 Author Report Share Posted October 15, 2017 Yes the rings are , see Paddy, I think he still has some there. Yes about 12 with sling atlas scope etc , Ideally I wanted a 18'' barrel but they don't make one, that would have pulled the weight down a bit but a lighter scope at some point will make the big difference. Keith Link to comment Share on other sites More sharing options...
David Hancock Posted October 15, 2017 Report Share Posted October 15, 2017 Now, I do like that ! Link to comment Share on other sites More sharing options...
Jax Posted October 19, 2017 Report Share Posted October 19, 2017 What bottom metal/mag did you use? I've got pretty much the same build in production at the moment, but in 308 with 18" proof sendero barrel as a lightweight stalking rifle. I went for a floor plate to try save weight. I was tempted by a Titanium Borden, but the big horn had me hooked the second I picked it up. Link to comment Share on other sites More sharing options...
TWG1 Posted October 19, 2017 Author Report Share Posted October 19, 2017 What bottom metal/mag did you use? I've got pretty much the same build in production at the moment, but in 308 with 18" proof sendero barrel as a lightweight stalking rifle. I went for a floor plate to try save weight. I was tempted by a Titanium Borden, but the big horn had me hooked the second I picked it up. I suspect I may know who that may be with, it's the manners bedding block with integral bottom metal, This has the Curtis three rounder in at the moment but takes any AI mag. I have another manners carbon stock for the rifle but cant make my mind up whether to sell it or keep, it trouble is if I keep it I will end up sticking a barrelled acton in it defeating the original concept of a switch barrel set up! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.