Jump to content

Digisight zero problems


Spready

Recommended Posts

Ive got a Pulsar digitsight 970 ,that has ran out of horizontal adjustment to the right, it max out at 40 with still about an inch and a half to go. its always been in the high 30's but after fitting a Pinto doubler and its seemed to make it the problem worse. the Tikka its on came with a contessa 20moa rail, so I'm close to the high adjustment limits too, so thinking of changing to a standard 0 MOA Rail. but has anyone else had any problems like this? anything to look out for? can the scope be shimmed to get the adjustment I need? any help would be greatly appreciated

Link to comment
Share on other sites

Hi,

The 20moa rail won't have any effect on horizontal adjustment

I think you will find its the doubler that is the issue, I am not sure how you mounted it, but I would say it's not ' true'

So, if you can twist it, or if it's the Allen key grub screws, slacken some & tighten others ..

 

It also depends on what distance your zero is, I find that a good 60 yard zero ( second zero is 190 yards ) for me, means I shim the rear - or using a 20moa rail, it gets it close to spot on

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy