stu47 Posted April 4, 2017 Report Share Posted April 4, 2017 Hi all, I need a picatinny rail for my Tikka M55, I have found 0 MOA picatinny rails on the net but would prefer a 20 moa rail as this would save me going for a Tier One Unimount (or similar) to gain the required elevation from my scope (Nightforce NXS - 30mm tube). Does anyone know of someone who offers a 20 or 30 moa rail for this action? Or, have any recommendations of an individual who can machine a suitable picatinny rail? Thanks in advance for any guidance, much appreciated. Cheers Stu. Link to comment Share on other sites More sharing options...
Ronin Posted April 4, 2017 Report Share Posted April 4, 2017 Why not machine the base of a 0 degree one ? Link to comment Share on other sites More sharing options...
stu47 Posted April 4, 2017 Author Report Share Posted April 4, 2017 That's an option but the base is only 5mm thick to begin with so I don't "think" there's enough meat on it to machine it down? I'm open to advice though as I may be wrong? Cheers Link to comment Share on other sites More sharing options...
Big Al Posted April 4, 2017 Report Share Posted April 4, 2017 That's an option but the base is only 5mm thick to begin with so I don't "think" there's enough meat on it to machine it down? I'm open to advice though as I may be wrong? Cheers It will be fine Stu, you dont need to remove much from one side away to nothing. Link to comment Share on other sites More sharing options...
stu47 Posted April 4, 2017 Author Report Share Posted April 4, 2017 Thanks Alan - much appreciated! Thanks Robin - I thought a lot more was removed to make 20 moa. Cheers gents. Link to comment Share on other sites More sharing options...
stu47 Posted April 18, 2017 Author Report Share Posted April 18, 2017 Thanks Alan - as always, your work is fast, accurate and exact - cheers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.