Jump to content

A few from this week.


Recommended Posts

First up is a Deviant in 6,5 creedmoor.

 

IMG_1775_zpstvus1tmk.jpg

 

Barrel is a Sassen HST at 20" and helically fluted. Threaded m18 x 1 and invisible capped. Paint is Ceracoat OD green.

 

Trigger is a calvin elite.

 

IMG_1774_zpsylmq1sxl.jpg

 

Third eye floor plate sat in a McMillan A5

 

IMG_1773_zpsi3mtbzzu.jpg

 

Next is one of my rifles which I,ve fancied revamping for a while. I shortened the barrel, and fitted a 3 port brake.

 

IMG_1767_zpsgzkqkxuw.jpg

 

This is a 6mmBr and its running a prototype magazine system, which will shortly be in production, and works flawlessly.

 

I dropped on a Whiskey chassis, and thought why not ?

 

Inspiration comes from the strangest places, and this pattern was born from watching giraffes and wild dogs at the zoo.

 

IMG_1765_zpstqxv2fdf.jpg

 

IMG_1766_zpsmwp3lplq.jpg

 

IMG_1769_zpsfs7ji8dn.jpg

 

IMG_1770_zpsqrvrvuuy.jpg

 

Last up is one of Mark,s nice little carbines.

 

The customer wanted a paint job to match his longer rifle, and took the opportunity to change the fore end.

 

Paint is Ceracoat OD green and AI dark earth....both in H series.

 

This type of job is a pig because there are plastic parts which have to be baked at a lower temp. The gun was painted green , then part cured. Then reassembled and the tan applied. A low bake to flash the tan off, then a full strip and metal and plastic parts baked separately to full cure.

 

8 Hours work in this one believe it or not.

 

IMG_1783_zps7fgdjp1d.jpg

 

IMG_1785_zpszlvg9glf.jpg

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy