Rammer223 Posted August 27, 2016 Report Share Posted August 27, 2016 Got the above sound mod haven't cleaned it for a while bit bored so thought strip it a give it a clean thick again can't undo it with my hands or even soft jaws in vice well as much as I dare tighten it a little frightened don't want to distort it any tips tricks Thanks in advance Lee Link to comment Share on other sites More sharing options...
Scotch_egg Posted August 27, 2016 Report Share Posted August 27, 2016 Leave it well alone. No need to strip it. The new A-Tec Hurtz is a one piece design with this very reason. Link to comment Share on other sites More sharing options...
MrCetrizine Posted August 27, 2016 Report Share Posted August 27, 2016 If you don't strip them after every couple of firings, they weld themselves together. I took mine to my local engineering company and was told they could get it apart but it would be destroyed by it. Mine was shot out anyway so I got rid for a better design. Link to comment Share on other sites More sharing options...
Rammer223 Posted August 27, 2016 Author Report Share Posted August 27, 2016 That answers that one then will leave alone and go for something different next time cheers Lee Link to comment Share on other sites More sharing options...
Rammer223 Posted August 27, 2016 Author Report Share Posted August 27, 2016 That answers that one then will leave alone and go for something different next time cheers Lee Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.