Ronin Posted July 10, 2016 Report Share Posted July 10, 2016 Tikka T3 308 Win Teaser for the new owner as hes waited a while for this: T3 Action, trued. 1-10 Twist Lothar Walther barrel Chambered in 308 Match min SAAMI spec Threaded and capped for moderator PSE Composited E-Tac (vs 3 ) stock with Atlas Works bottom metal for AICS mags - I really rate the E Tac stocks Bedded with Devcon Coated in Black Ceracote, satin finish Trigger reworked for crisp safe release with custom spring Not quite complete but will be in a few days Link to comment Share on other sites More sharing options...
Treedave Posted July 10, 2016 Report Share Posted July 10, 2016 Does this mean that he'll stop telling us how to and show us instead? Can I suggest a presentation at a range day, with the relevant friends there to give support. Can't wait, there will be NO pressure on the firing line Link to comment Share on other sites More sharing options...
dannywayoflife Posted July 10, 2016 Report Share Posted July 10, 2016 That is STUNNING!! Link to comment Share on other sites More sharing options...
dannywayoflife Posted July 10, 2016 Report Share Posted July 10, 2016 How much "truing" did you have to do on the tikka? I've read they don't usually need any? Link to comment Share on other sites More sharing options...
Ronin Posted July 11, 2016 Author Report Share Posted July 11, 2016 I have taken a fine cut off the action face, bolt lugs, action lug abutments and bolt face. Once done the lugs have been lapped, the donor in question had seen a bit of work hence the extra effort. Link to comment Share on other sites More sharing options...
dannywayoflife Posted July 11, 2016 Report Share Posted July 11, 2016 That really is stunning great work sure the new owner will be over the moon! Link to comment Share on other sites More sharing options...
ejg223 Posted July 11, 2016 Report Share Posted July 11, 2016 Very nice Andy, what do you think of the centring ring on the barrel? edi Link to comment Share on other sites More sharing options...
Ronin Posted July 12, 2016 Author Report Share Posted July 12, 2016 Hi Edi yes a good idea especially for your stock as they have a uniform barrel channel, the delrin (non taped ring) was farther back towards the action when it was set into the compound - it moved forards when I was messing with pictures - devcon had set anyway. I usually have a two points of contact - one at the tang and one at the barrel channel - as far forwards as possible. With your stocks, I will be using the two ring method from now on - definately works Link to comment Share on other sites More sharing options...
Scotch_egg Posted July 12, 2016 Report Share Posted July 12, 2016 What profile barrel have you used? Link to comment Share on other sites More sharing options...
Ronin Posted July 12, 2016 Author Report Share Posted July 12, 2016 What profile barrel have you used? Medium Palma Dave Link to comment Share on other sites More sharing options...
ejg223 Posted July 13, 2016 Report Share Posted July 13, 2016 Had a med. Palma at 20" before, great compromise between weight and accuracy. Looking forward to first targets from this one. edi Link to comment Share on other sites More sharing options...
Ronin Posted July 24, 2016 Author Report Share Posted July 24, 2016 Completed rifle: Now fitted with Contessa rail, bonded to the action. 4-16 PM11 mounted in Third Eye Tactical ringset PSE ETact vs 3 stock really makes this a perfect all purpose rifle. Link to comment Share on other sites More sharing options...
Tuck Posted July 24, 2016 Report Share Posted July 24, 2016 Andy is the Red tape on the bipod, to stop the spring twanging? When stalking? Link to comment Share on other sites More sharing options...
Ronin Posted July 24, 2016 Author Report Share Posted July 24, 2016 Andy is the Red tape on the bipod, to stop the spring twanging? When stalking? It is, if I use that bipod, I tend to use an Atlas now. Link to comment Share on other sites More sharing options...
Tuck Posted July 24, 2016 Report Share Posted July 24, 2016 Thanks, nice job by the way, will give that a try with the Harris Link to comment Share on other sites More sharing options...
srvet Posted July 24, 2016 Report Share Posted July 24, 2016 Jeez you had better hope that shoots or you'll never hear the end of it!! Looks fab!! Link to comment Share on other sites More sharing options...
Ronin Posted July 25, 2016 Author Report Share Posted July 25, 2016 Shoots fine with factory, though will come into its own with handholds Tested yesterday with RWG was printing well Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.