Guest Rich.K Posted May 5, 2007 Report Share Posted May 5, 2007 I have been using Re10x in my 204 and found it a very good powder with high velocities out of a short barrel. Easy on brass. Now Reloader is like rocking horse crap to get hold of and am looking at changing. Any ideas, what are you using, want to keep the velocity up with 32 grain v max. Cheers Rich.K Link to comment Share on other sites More sharing options...
craigyboy Posted May 5, 2007 Report Share Posted May 5, 2007 I am using R10X (I just got the last tub my shop has) try also H335, you should be able to get it easier, when my 10X is done this is what ill be using as my local doesent know when he will get more, also I heard vit 133 works well but have no personal experience with it so you may need to look into that one. Link to comment Share on other sites More sharing options...
pnse Posted May 5, 2007 Report Share Posted May 5, 2007 i used n133 in mine gave good speed with low spreads,3700 with 40gr and 4050 with the 32's out of a 22'' barrel Link to comment Share on other sites More sharing options...
baldie Posted May 5, 2007 Report Share Posted May 5, 2007 I like h4895 with the 32,s. Care to share the n133 data anyone? Link to comment Share on other sites More sharing options...
craigyboy Posted May 5, 2007 Report Share Posted May 5, 2007 yeah I second that baldie, some info on the 133 would be nice I might get some a see how it goes for the fun. Link to comment Share on other sites More sharing options...
pnse Posted May 6, 2007 Report Share Posted May 6, 2007 top loads in my gun so work up,28.2 grn n133 with 40 bergers 3725,28.5 n133 with 32 vmax 4060. gun rem lvsf 22'' barrel,got good speeds out of the short barrel but the gun did'nt shoot better tha 2'' with any powder and bullet. Link to comment Share on other sites More sharing options...
6mmBR Posted May 7, 2007 Report Share Posted May 7, 2007 Here you go guys load data for .204 with N133 and 32gn V max. Cartridge : .204 Ruger Bullet : .204, 32, Hornady V-MAX 22004 Cartridge O.A.L. L6: 2.220 inch or 56.39 mm Barrel Length : 24.0 inch or 609.6 mm Powder : Vihtavuori N133 Predicted data by increasing and decreasing the given charge, incremented in steps of 2.0% of nominal charge. CAUTION: Figures exceed maximum and minimum recommended loads ! Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time % % Grains fps ft.lbs psi psi % ms -20.0 82 20.00 3053 662 26546 5743 89.9 1.186 -18.0 84 20.50 3123 693 28302 5909 91.2 1.157 -16.0 86 21.00 3193 724 30170 6068 92.4 1.129 -14.0 88 21.50 3262 756 32169 6220 93.5 1.101 -12.0 91 22.00 3332 789 34297 6364 94.6 1.074 -10.0 93 22.50 3401 822 36570 6499 95.6 1.047 -08.0 95 23.00 3470 856 38995 6624 96.5 1.019 -06.0 97 23.50 3538 889 41581 6740 97.3 0.991 -04.0 99 24.00 3605 924 44313 6845 97.9 0.964 -02.0 101 24.50 3672 958 47208 6938 98.5 0.938 +00.0 103 25.00 3739 993 50293 7021 99.0 0.913 ! Near Maximum ! +02.0 105 25.50 3805 1029 53580 7091 99.4 0.889 ! Near Maximum ! +04.0 107 26.00 3870 1064 57086 7148 99.7 0.866 ! Near Maximum ! +06.0 109 26.50 3934 1100 60827 7193 99.9 0.844 !DANGEROUS LOAD-DO NOT USE! +08.0 111 27.00 3997 1135 64821 7225 100.0 0.823 !DANGEROUS LOAD-DO NOT USE! +10.0 113 27.50 4060 1171 69089 7245 100.0 0.802 !DANGEROUS LOAD-DO NOT USE! Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge Data for burning rate increased by 10% relative to nominal value: +Ba 103 25.00 3893 1077 59475 6821 100.0 0.851 !DANGEROUS LOAD-DO NOT USE! Data for burning rate decreased by 10% relative to nominal value: -Ba 103 25.00 3526 884 41305 6886 94.1 0.994 Hope this helps Dave Link to comment Share on other sites More sharing options...
6mmBR Posted May 7, 2007 Report Share Posted May 7, 2007 Heres data for 40 gn Vmax in .204. Cartridge : .204 Ruger Bullet : .204, 40, Hornady V-MAX 22006 Cartridge O.A.L. L6: 2.220 inch or 56.39 mm Barrel Length : 24.0 inch or 609.6 mm Powder : Vihtavuori N133 Predicted data by increasing and decreasing the given charge, incremented in steps of 2.0% of nominal charge. CAUTION: Figures exceed maximum and minimum recommended loads ! Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time % % Grains fps ft.lbs psi psi % ms -20.0 84 20.00 2989 793 31969 6307 95.8 1.193 -18.0 87 20.50 3055 829 34153 6452 96.7 1.165 -16.0 89 21.00 3120 864 36451 6587 97.5 1.138 -14.0 91 21.50 3184 901 38876 6711 98.2 1.106 -12.0 93 22.00 3248 937 41455 6823 98.8 1.075 -10.0 95 22.50 3312 974 44199 6923 99.2 1.045 -08.0 97 23.00 3374 1011 47119 7011 99.6 1.017 -06.0 99 23.50 3436 1049 50226 7086 99.8 0.989 ! Near Maximum ! -04.0 101 24.00 3497 1086 53535 7148 100.0 0.963 ! Near Maximum ! -02.0 103 24.50 3557 1124 57059 7196 100.0 0.938 ! Near Maximum ! +00.0 106 25.00 3616 1161 60814 7238 100.0 0.913 !DANGEROUS LOAD-DO NOT USE! +02.0 108 25.50 3675 1199 64819 7278 100.0 0.890 !DANGEROUS LOAD-DO NOT USE! +04.0 110 26.00 3732 1237 69092 7317 100.0 0.867 !DANGEROUS LOAD-DO NOT USE! +06.0 112 26.50 3789 1275 73656 7353 100.0 0.845 !DANGEROUS LOAD-DO NOT USE! +08.0 114 27.00 3845 1313 78535 7387 100.0 0.824 !DANGEROUS LOAD-DO NOT USE! +10.0 116 27.50 3901 1352 83755 7419 100.0 0.804 !DANGEROUS LOAD-DO NOT USE! Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge Data for burning rate increased by 10% relative to nominal value: +Ba 106 25.00 3725 1233 71383 6980 100.0 0.857 !DANGEROUS LOAD-DO NOT USE! Data for burning rate decreased by 10% relative to nominal value: -Ba 106 25.00 3451 1058 50341 7433 98.4 0.988 ! Near Maximum ! Cheers Dave Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.