Jump to content

Another .308.


baldie

Recommended Posts

Here's one I finished this morning and then took to Diggle for a pleasant couple of hours in the sunshine.

 

IMG_1877_zpseff0a739.jpg

 

IMG_1880_zps951661f1.jpg

 

Its a Valkyrie Odin action with standard fluted bolt, and a facetted rear shroud. The barrel is a Border Archer fluted at 20" [ i think ] Screwcut 17mm x 1 with spigot and invisible cap.

 

IMG_1878_zpsb7de3bde.jpg

 

IMG_1879_zpsd67fe6da.jpg

 

The moderator is a Northstar.

 

IMG_1885_zpsa476c8ae.jpg

 

The metalwork is painted in H series Cerakote and the colours are OD green and Armour black.

 

Tactical bolt knob and 20 MOA rail.

 

The stock is a Manners T5 which the customer wished painted to mimic the marble effect on a McMillan. This was done with Duracoat in OD green, Snow grey , and Matt Black.

 

IMG_1881_zpsc6c1073a.jpg

 

The trigger is a Jewell and the stock is fully pillar and devcon bedded.

 

My bottom metal and a 5 round magazine in .308 calibre.

 

Popped a scope onboard and bore sighted the gun. Shot and cleaned with 5 rounds , then shot a 5 round group with 155 scenars which went around 3/4"

 

Then shot these two groups with 167 scenars and Vhit 150 following the lapua "accurate load " in the manual. Despite being a compressed load, it was far more pleasant to shoot than the 155/rel 15 combo.

 

I dont know why i piss about with 155,s and rel 15 / vhit 140 ect etc...when this load shoots like this. The rounds are SAAMI length and feed easily from a mag. Job done. These are 5 round groups.

 

IMG_1884_zps64a946fb.jpg

 

 

 

Link to comment
Share on other sites

holy cow that is one of the best yet dave.right up my street that is.

it would be wasted on you ,much better suited to my shooting skills.very nice dave but cant take much more of this gun porn ,it's just to much

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy