Oly Posted December 31, 2007 Report Share Posted December 31, 2007 OK, just had a look through my usual data (inc reloaders nest) and I'm in need of a load for a 90gn (Nosler Ballisitic Tip is the exact round) for my .243Win using H-414 powder. Cheers Link to comment Share on other sites More sharing options...
Oly Posted December 31, 2007 Author Report Share Posted December 31, 2007 OK, ignore the above...I've found one on the Hodgdon wesbite However, i anyone reloads this calibre using H-414 and has any further data (of all weights of bullet head) it would always be appreciated! Link to comment Share on other sites More sharing options...
reloaderdan Posted January 3, 2008 Report Share Posted January 3, 2008 hi oly i reload .243 in h414 and h4895 the loads below are some of what i use hope this helps 55gr nostler bt 45.0 grns START 50.0grns MAX 58gr vmax 46.0 49.0 60gr siera hp 43.0 47.5 65gr vmax 45.0 48.0 70gr speer hp 42.0 46.0 75gr vmax 42.0 46.0 80gr siera btsp 42.0 45.0 956gr nostler 39.0 42.0 100gr speer btsp 37.0 40.0 105gr amax 36.0 39.0 107gr siera bthp 35.0 38.0 Link to comment Share on other sites More sharing options...
charly hunter Posted January 3, 2008 Report Share Posted January 3, 2008 I have a 243 I was struggling with until I started loading at sammi spec, 90grn Nosler balistic tips with 40.4 grns of Reloader 19 OAL 2.650 I have also used 41.5grns of N 140 seated at a very short 2.230 and they were shooting less than a 1/4 inch group at 100yds. If I hadn't found these loads I was ready to beat the rifle against the wall Link to comment Share on other sites More sharing options...
Redfox Posted January 3, 2008 Report Share Posted January 3, 2008 H4350 or IMR 4350 are recognised as about the best powders for this cal and most bullets. I have had wonderful results with the Speer 75gr hp ( not the tnt one) and 48grs of H4831SC, better than .6" at 250yds, great for varmints, a bit lightweight for Roe. Stag 1933is having fun with these at the moment too using N160 amd Federal 210m primers, worth a try. Mine were loaded .040" off the rifling and using CCI 200 BR primers, any closer opened up the groups, not sure where stag is loading his but it wont be touching for sure. Redfox Link to comment Share on other sites More sharing options...
Oly Posted January 4, 2008 Author Report Share Posted January 4, 2008 hi oly i reload .243 in h414 and h4895 the loads below are some of what i use hope this helps55gr nostler bt 45.0 grns START 50.0grns MAX 58gr vmax 46.0 49.0 60gr siera hp 43.0 47.5 65gr vmax 45.0 48.0 70gr speer hp 42.0 46.0 75gr vmax 42.0 46.0 80gr siera btsp 42.0 45.0 956gr nostler 39.0 42.0 100gr speer btsp 37.0 40.0 105gr amax 36.0 39.0 107gr siera bthp 35.0 38.0 Absolutely brilliant - thanks Dan! I take it those loads are only the ones for H414? Redfox - gone down the H414 route as it seems to be the mostly widely available powder for getting a good range of bullet weight loads. Been loading to 0.030" off the rifling at present, but will be playing around some more with that soon. Link to comment Share on other sites More sharing options...
reloaderdan Posted January 5, 2008 Report Share Posted January 5, 2008 hi there oly yes this is load data for h414 only mate left hand numbers are start rate and right hand numbers are MAX rates hope this help happy hunting Link to comment Share on other sites More sharing options...
Oly Posted January 5, 2008 Author Report Share Posted January 5, 2008 Cheers Dan, much appreciated. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.