luke wady Posted August 3, 2011 Report Share Posted August 3, 2011 hi is any one having trouble with this, iam using new r-p brass , getting case head speration on 1 laoding , never had problems with it befor. is it a bad batch out there? thanks for help Link to comment Share on other sites More sharing options...
Splash Posted August 3, 2011 Report Share Posted August 3, 2011 hi is any one having trouble with this, iam using new r-p brass , getting case head speration on 1 laoding , never had problems with it befor. is it a bad batch out there? thanks for help Please give us some more info ! Die's Prep Powder & amount Bullets Rifle I have been useing the same case's as you, Mine are very clean after fireing, not streching or showing any signs of stress. BUT i did aneal the batch befor first load. Link to comment Share on other sites More sharing options...
luke wady Posted August 3, 2011 Author Report Share Posted August 3, 2011 hi Splash the rifle is rebarreled cz , i did the work myself and have cheacked that its all good there, the load is 30 gr berger in front of 17.5gr h322 and fed 205 primers, die's are honrady full lenght for frist fireing , case are failing half way up body, only had 35 shot in total and lost 3 case this way , there are no pressure signes, so can only think its the brass thanks Link to comment Share on other sites More sharing options...
luke wady Posted August 3, 2011 Author Report Share Posted August 3, 2011 problem solved the new case are .024'' shorter than sammi spec. for go-guage. so looking like ill have to make my next brass. Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.