
pow1
Members-
Content count
48 -
Joined
-
Last visited
About pow1
-
Rank
Newbie or Infrequent Poster
Profile Information
-
Gender
Male
-
Location
Caerphilly
-
Interests
Target shootimg, clays, shotguns, hunting in general!
Recent Profile Visitors
106 profile views
-
Gbal, by cut in the case i hacksawed a small notch in the neck to allow for the head to seat more easily. I measured all 3 cases and they are the same length!! Out atm, but will be home later and will reply properly!
-
Gbal, I havent reloaded for the creedmoor yet (thats what thos is for). I have happily used this method for my 308 and use 30 tho jump successfully. Im just really confused as to whats happening here:( I use the hornady comparator with insert with my digital calipers to measure.
-
Gbal, I havent reloaded for the creedmoor yet (thats what thos is for). I have happily used this method for my 308 and use 30 tho jump successfully. Im just really confused as to whats happening here:(
-
I tried with 4 different heads in each case, each is consistent in each case.....
-
Quick question quys: Been measuring to find the coal but am getting funny results.. I used 3 neck sized cases (previously shot from my rifle), one with a small cut in the neck, other with a bigger cut and the last with no cut. All 3 give different lengths to the other, but each gives the same with different heads.. Id have thought once hitting the lands thats it, its I the case at a set distance and can't go any further in irrespective of the resistance from the case! Advice would be greatly received!
-
Well, i have the gun now! Rs62, 139 scenars Lapua palma brass and magnum primers! Now i need to start making some loads and get hold of a chrono! Will update over the coming months!
-
Have pm'd you to order a set mate, can you check your Messages!
-
Ahhh!! How much inc post mate??
-
Anyone know where I can get GROVTEC US, INC. Heavy Duty Push Button Swivels apart from brownells, I also need some 6.5 Hornady bits so would be helpful if they sell those things too!
-
Charlts, What mv are you gettimg with that combination as ive got some tmks and was going to get rs62..
-
Hobbit, why do you load them short and not say 10tho off the lands?
-
Calling all reloading Yodas out there - 6.5 Creedmoor recipe suggestions
pow1 replied to deerman's topic in Handloading
Interesting results, im getting the cci 450 magnum primers I think and will either use rs60 or 65 (using rs40 in my 308 and the barrel is still fine...) -
Calling all reloading Yodas out there - 6.5 Creedmoor recipe suggestions
pow1 replied to deerman's topic in Handloading
What lenght barrels are you guys using? Anyone else tried RS60? -
6.5 choices?
pow1 replied to Ro6.5's topic in Target Shooting & Informal Long Range Shooting Practice
Anyone get close to this velocity? If so what powder are you using?