kaduflyer Posted October 2, 2017 Report Share Posted October 2, 2017 anyone have any expierience with case trimmer and neck uniformity i was looking for a trimmer that can do both after looking for seems ages its hard to make decision on what kind so expierience is the best way to go any ideas Link to comment Share on other sites More sharing options...
jcampbellsmith Posted October 2, 2017 Report Share Posted October 2, 2017 I'd recommend you get a good case trimmer and a good neck turning kit. I don't think a combination tool will give you as good results as two individual tools for two quite distinct operations will. http://www.accurateshooter.com/technical-articles/neck-turning-tool-cutting-tips/ https://www.sinclairintl.com/guntech/Choosing-A-Case-Trimmer-/detail.htm?lid=16138 I've just ordered a Little Crow Case trimmer - https://littlecrowgunworks.com/product-category/case-trimmers-and-case-prep-tools/?v=79cba1185463 Regards JCS Link to comment Share on other sites More sharing options...
chaz Posted October 2, 2017 Report Share Posted October 2, 2017 Trimming to length, well you have all sorts of options....., Hornady do a nice one...But as for neck uniforming, flash beburring and that sort of thing. I'd advise getting some good advice as to whether you really need to do that with your brass, if you're shooting out of a standard barrel. I've gone through that, but found it made no difference to anything.... I'd made sure i did a proper job and got a lot of advice from others before i wasted my money on the tools to do it.... In the end I just bought Lapua brass and never give it a second thought bar trimming now... Chaz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.