Jump to content

A pair of Creedmoors


Recommended Posts

A couple of Remington 700's in 6.5 Creedmoor.
Both rifles have been rebarrelled from their original calibre of .243 and .308 with 24" 1:8 twist med Palma blanks from Sassen Eng.
The receiver threads were recut oversize, lugs and faces trued up and bolt face squared, all lug faces lapped and reassembled with new oversize recoil lugs from Tier One.
The Stainless barrel and action were bead blasted in house then fitted into a MDT chassis and suppressor machined to clear the fore-end.

The second rifle received exactly the same treatment, only finished in Armor Black Cerakote before fitting into a AICS stock.

Both rifles chambered with new reamers and gauges from BBT.

Initial accuracy reports from the customers have been highly positive

20031948_1973362932886392_2555317126531219989410_1973362929553059_3855399828791020032016_1973362936219725_5003403122277318199274_1973362939553058_36689864416888

19961141_1973362972886388_8285938757677920108440_1973362976219721_8385632001439119990089_1973362979553054_11564465702622

 

I realise I don't get much coverage in the bolt gun world, but I've been doing these since 2003

 

This is a target sent in today from the owner of the second rifle

4 shots through one hole.....16 through the one above!!

20374724_1981277078761644_54459203017718

 

Good rifles, well built and reasonably priced

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy