Davesson Posted June 20, 2017 Report Share Posted June 20, 2017 Anyone any experience knowledge of clamp on muzzle breaks? My local guy's lathe is out of commission at the moment and the other dealer I use has to send the rifle away if I want to get something threaded. Wondered if the Clamp on Muzzle Breaks were a viable option. Cheers Chris Link to comment Share on other sites More sharing options...
MrCetrizine Posted June 20, 2017 Report Share Posted June 20, 2017 My guess is that it would be potentially off centre as it would be aligned to the outside of the barrel and not the bore. So I wouldn't touch one personally. Link to comment Share on other sites More sharing options...
MrCetrizine Posted June 21, 2017 Report Share Posted June 21, 2017 I'm sure Baldie or Bradders among others on here are more than up to the job. They may even have them in stock. Link to comment Share on other sites More sharing options...
baldie Posted June 21, 2017 Report Share Posted June 21, 2017 I have at least half a dozen different styles of brakes in stock, in various configurations. Give me a buzz during the day to discuss. Link to comment Share on other sites More sharing options...
Davesson Posted June 21, 2017 Author Report Share Posted June 21, 2017 I have at least half a dozen different styles of brakes in stock, in various configurations. Give me a buzz during the day to discuss. Belter Cheers Chris Link to comment Share on other sites More sharing options...
Vortex Posted June 21, 2017 Report Share Posted June 21, 2017 I had a roedale clamp on break on a 20" 308, it worked great. Never came lose infact it was a tight fit to get it on then clamp it. Vortex Link to comment Share on other sites More sharing options...
pe4king Posted July 9, 2017 Report Share Posted July 9, 2017 I have also had a Roedale on my Winchester stealth for over 5 years, hundreds of rounds no issues whatsoever Link to comment Share on other sites More sharing options...
MrCetrizine Posted July 10, 2017 Report Share Posted July 10, 2017 Not if it's misaligned Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.