Lukas_K Posted June 16, 2017 Report Share Posted June 16, 2017 So who's gone this road before? What spacer thickness did you decide, have you put it in the front or back? Any modifications to the follower? I'm even considering buying a Primal rights setup for AI mags and fitting it... Link to comment Share on other sites More sharing options...
38super Posted June 17, 2017 Report Share Posted June 17, 2017 I have the Primal Rights unit in my 22BR & 6BR running AI mags. Works well provided you cycle at a reasonable pace. I find slow feeding to still be problematic. Tempted to make my own spacer for the front to see if it makes it any better. Link to comment Share on other sites More sharing options...
lambsey Posted June 24, 2017 Report Share Posted June 24, 2017 Just trying to do exactly the same thing to my 6br TRG. Thinking of trying to mod the existing mag, or if its tool much drama ill go down the primal rights set up. I'll post some pics to show how I get on. Link to comment Share on other sites More sharing options...
baldie Posted June 25, 2017 Report Share Posted June 25, 2017 I now have my own BR conversion on offer. It works similar to the American offerings, but its made here in the UK. I'll get some pics done. It works faultlessly. Link to comment Share on other sites More sharing options...
Lukas_K Posted June 25, 2017 Author Report Share Posted June 25, 2017 Hi Dave, for some reason I thought you did AI mags only? TRG too, then? Any loss in capacity? Link to comment Share on other sites More sharing options...
baldie Posted June 25, 2017 Report Share Posted June 25, 2017 Hi Lukas, No the conversion is for AI mags. I have a TRG in at the moment though. I'll have a look and see if the conversion could be fitted somehow. Link to comment Share on other sites More sharing options...
Guesty Posted June 25, 2017 Report Share Posted June 25, 2017 I now have my own BR conversion on offer. It works similar to the American offerings, but its made here in the UK. I'll get some pics done. It works faultlessly. I would be very interested to see that Dave. Also what is the cost please? Link to comment Share on other sites More sharing options...
Lukas_K Posted June 25, 2017 Author Report Share Posted June 25, 2017 Whatever the cost, it's worth it. Nobody makes a dedicated mag. And it's just broccoli running a repeater action as a single shot. The AI/TRG conversion should be close enough dimensionally. TRG mag is a fraction of an inch longer in oal, very slightly narrower in front cross-section (the follower may need a little shave here) and not as high, so the OAL spacer must be shortened. Link to comment Share on other sites More sharing options...
happyhunter Posted June 25, 2017 Report Share Posted June 25, 2017 I now have my own BR conversion on offer. It works similar to the American offerings, but its made here in the UK. I'll get some pics done. It works faultlessly. Hi Dave, is this available for both 5 and 10 round mags? Rough idea on cost? Regards Link to comment Share on other sites More sharing options...
baldie Posted June 25, 2017 Report Share Posted June 25, 2017 The mag conversion is £40 plus carriage. The new spring mimics the AI leaf type, but is dimensionally correct to allow it to fold flat and still utilise the rear spacer...something the std spring cannot do. The spring is made for the 10 rd mag, but can easily be shortened to fit a 5 round magazine. Link to comment Share on other sites More sharing options...
lambsey Posted June 25, 2017 Report Share Posted June 25, 2017 Nice one Dave. I'd be interested in one if it fits the TRG. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.