mcpie Posted May 2, 2017 Report Share Posted May 2, 2017 Can I ask you guys what sort of neck tension you're running with heavier bullets in .308 (other larger calibre observations welcomed too...) I use a .30 cal 215gr Berger Hybrid for Match Rifle and have been sizing cases with a bushing which gives .003" hold. This is used in conjunction with a 0.030" jump to the rifling. The Berger sits on top of a hefty amount of RS60 in a Palma case. What do you find is giving good results? R Link to comment Share on other sites More sharing options...
Andrew Posted May 13, 2017 Report Share Posted May 13, 2017 I've been shooting warm loads with Nosler 190 Custom Competitions. I use an RCBS Small Base Full Length Sizer, trim to a uniform length, and after seating, use a Lee Factory Crimp Die to apply a somewhat stiff crimp. I get very small ES and SD. Accuracy is better than I can hold from my Ruger Precision. A raggedy hole at 200 yards,~Andrew Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.