baldie Posted March 29, 2017 Report Share Posted March 29, 2017 Finished this today. This started off as a Stiller Spectre action with built in 20 moa rail. A lovely action . Onto it went a Sassen helically fluted blank, in PSS profile , at 22" long. Muzzle threaded M18 x 1 and invisible thread cap, plus one of my 3 port brakes. The stock is a McMillan HTG M40 Adjustable. First job was to machine out and fit the pillars. Then it was opened up to accept a third eye floor plate, and fully bedded in. A week later, the barrelled action was bedded in too. After machining , I painted the interior. Serves no purpose, but makes it look nice. This action will run the Accuracy International AW magazine, so it was a no brainer, as they are shorter and smoother than the AICS magazine. The trigger is one of the excellent Canadian Triggertech units. All metalwork is done in Ceracoat Graphite black, with the barrel flutes picked out in McMillan grey, to match the grey in the stock. A pica tinny rail was fitted to the stocks fore end, to accept a Javelin Bipod mount and Q/D swivel. Finally, the steel specs on the stainless bolt heads bugged me, so into a simple jig they went, and were machined off. Paint is Ceracoat Graphite black with the barrel flutes picked out in McMillan grey to match the grey in the stock. All work done in house. Loved building this....my kinda gun. Link to comment Share on other sites More sharing options...
Dellboy Posted March 29, 2017 Report Share Posted March 29, 2017 Very nice :) Link to comment Share on other sites More sharing options...
ChrisF Posted March 29, 2017 Report Share Posted March 29, 2017 Awesome looking , ONLY needs 2 things ( other than a good scope ) , 1 ) A good can/suppressor & 2 ) A folding stock light weight stock ala Manners . Very NICE . Link to comment Share on other sites More sharing options...
NICK Posted March 29, 2017 Report Share Posted March 29, 2017 That is a really stunning piece Baldie. Nick. Link to comment Share on other sites More sharing options...
visiter1 Posted March 30, 2017 Report Share Posted March 30, 2017 fantastic Link to comment Share on other sites More sharing options...
munkjack Posted March 30, 2017 Report Share Posted March 30, 2017 Like that!! It's going to be good all rounder for someone!! Link to comment Share on other sites More sharing options...
Dunc Posted March 30, 2017 Report Share Posted March 30, 2017 Dave, that is really beautiful.... Envious. Link to comment Share on other sites More sharing options...
Dunc Posted March 30, 2017 Report Share Posted March 30, 2017 Will start saving Link to comment Share on other sites More sharing options...
ashcroft Posted March 30, 2017 Report Share Posted March 30, 2017 Like that!! It's going to be good all rounder for someone!! That was my exact plan when I ordered it. Can't wait to get hands on as looks even better than my initial visualization Link to comment Share on other sites More sharing options...
swagger Posted March 30, 2017 Report Share Posted March 30, 2017 That's very nice. I really like the htg stocks. Not sure on the fluting though! Link to comment Share on other sites More sharing options...
meles meles Posted March 31, 2017 Report Share Posted March 31, 2017 From a technical point of view, we used to be dead set against fluting barrels but then began to accept that, as most well made guns are more accurate than their users, it probably doesn't actually matter and so if somebody places aesthetics above capability then go ahead. Link to comment Share on other sites More sharing options...
Soggy biscuit Posted April 2, 2017 Report Share Posted April 2, 2017 are any British actions made to take aw mags ? Link to comment Share on other sites More sharing options...
baldie Posted April 3, 2017 Author Report Share Posted April 3, 2017 Not to my knowledge. Link to comment Share on other sites More sharing options...
bdt Posted April 5, 2017 Report Share Posted April 5, 2017 far to nice for you mr Ashcroft , have got a can of black paint you can have Link to comment Share on other sites More sharing options...
silent_varmintor Posted April 6, 2017 Report Share Posted April 6, 2017 This is amazing work Dave !!!! Link to comment Share on other sites More sharing options...
Foxdropper Posted June 28, 2017 Report Share Posted June 28, 2017 What a stunning rifle Dave, who was the lucky chap !!!? Link to comment Share on other sites More sharing options...
dannywayoflife Posted June 28, 2017 Report Share Posted June 28, 2017 Ding dong!! Link to comment Share on other sites More sharing options...
Codders69 Posted July 5, 2017 Report Share Posted July 5, 2017 Another top job. My sort of rifle Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.