baldie Posted March 16, 2017 Report Share Posted March 16, 2017 Set about sorting these out last week. Slipped a 595 action into the mill and opened it up to accept an AICS magazine. I have stocks of floor plates in now for this action. The mag will not sit high enough without this machining work. It means a re proof, so its best done in conjunction with a re barrel etc. The video [ if it works], shows the action dummied up with the floor plate and a 10 shot magazine. I only had a few 6mmBr rounds handy, but it shows it feeding flawlessly. Ok, there is no barrel on the action, but it works, trust me. The magazine has my new 6mmBr/22br/20 br/6ppc/22ppc etc conversion, which will shortly be available as an aftermarket kit. http://img.photobucket.com/albums/v223/baldiedave/th_IMG_2076_zpshnrffi74.mp4 Link to comment Share on other sites More sharing options...
trucraft Posted March 16, 2017 Report Share Posted March 16, 2017 Can't seem to get the video to work Dave! Link to comment Share on other sites More sharing options...
srvet Posted March 17, 2017 Report Share Posted March 17, 2017 Looks like a great idea. Can you post pics of a finished rifle with mag system when you have one ready Cheers Link to comment Share on other sites More sharing options...
Catch-22 Posted March 17, 2017 Report Share Posted March 17, 2017 That's exactly what Stuart Anslem did to my 595 using CDI precision bottom metal. Following CDI precision's instructions to the letter, my tikka feeds butter smooth from AICS in my Manners GAT stock - zero feeding and extraction problems. It's a well worth getting this conversion done! Link to comment Share on other sites More sharing options...
finnbear270 Posted May 18, 2017 Report Share Posted May 18, 2017 Might be seeing piccies for me here soon, Link to comment Share on other sites More sharing options...
Soggy biscuit Posted August 27, 2017 Report Share Posted August 27, 2017 Hi baldie how much would one of these set me back ? Cheers sb Link to comment Share on other sites More sharing options...
finnbear270 Posted September 25, 2017 Report Share Posted September 25, 2017 I have a suspicion it was my new foxing rig in the vid, almost ready to go test, just waiting on a brass neck pilot,.. Struggling with the tech to get pics C:\Users\finnb\Pictures\2017-09-14 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.