David Hancock Posted August 19, 2016 Report Share Posted August 19, 2016 Questions 1 - will it physically strap onto a moderator, or does it have to secure onto a naked barrel for best effect ? 2 - is the V3 measurably better than the £195 Sporter ? I need to get a base line understanding of my velocities and don't need a full bells and whistles version. Many thanks. Link to comment Share on other sites More sharing options...
triggersqueezer Posted August 19, 2016 Report Share Posted August 19, 2016 will not fit over mod just barrel.its worth noting my friends v3 with sensitivity setting could pick up my 17 fireball when the sporter would not.that said that is the only time i could fault the sporter so 9 out of ten aint bad. Link to comment Share on other sites More sharing options...
trucraft Posted August 19, 2016 Report Share Posted August 19, 2016 It will stamp on to a naked barrel or mod, just use the spacers provided. This is on my Atec Maxim. Both great but if you only need the basics Sported will do. Link to comment Share on other sites More sharing options...
David Hancock Posted August 19, 2016 Author Report Share Posted August 19, 2016 Nice Kahles there Mr T. What spec ? Link to comment Share on other sites More sharing options...
trucraft Posted August 19, 2016 Report Share Posted August 19, 2016 Nice Kahles there Mr T. What spec ? Thanx, rifle or scope? Link to comment Share on other sites More sharing options...
triggersqueezer Posted August 19, 2016 Report Share Posted August 19, 2016 It will stamp on to a naked barrel or mod, just use the spacers provided. This is on my Atec Maxim. Both great but if you only need the basics Sported will do. that's not the sporter ? Link to comment Share on other sites More sharing options...
Tom D Posted August 19, 2016 Report Share Posted August 19, 2016 I bought the sporter, it doesn't pick up over the mod, however I only tried it with the HMR. With the mod off it picked up the wee HMR bullets fine. I have used it on the Vartarg without the mod and it also worked faultlessly. I wonder if it will pick yo the 7mm-08 with the mod as the bullets are so much bigger? I haven't had chance to try yet.. Link to comment Share on other sites More sharing options...
Tom D Posted August 19, 2016 Report Share Posted August 19, 2016 One other thing, I don't think it would be hard to modify the sporter to fit over a mod, it would need some careful work with a saw to take down the plastic mount a little. I may yet do this to mine.. Link to comment Share on other sites More sharing options...
Mangus Posted August 19, 2016 Report Share Posted August 19, 2016 My sporter suits my needs just fine. Awesome bit of kit, I don't think there will be any velocity variance in testing without a moderator on board... Link to comment Share on other sites More sharing options...
trucraft Posted August 20, 2016 Report Share Posted August 20, 2016 I have the V3. My mistake, I thought the barrel fitting was the same one both. Have a word with Gary from March he's really helpful. Link to comment Share on other sites More sharing options...
David Hancock Posted August 20, 2016 Author Report Share Posted August 20, 2016 Mr t. The scope Link to comment Share on other sites More sharing options...
trucraft Posted August 20, 2016 Report Share Posted August 20, 2016 Mr t. The scope K624I with Mil4 FFP Ret http://www.kahles.at/verwaltung/uploads/20160204192815K624i_Mil4.pdf Love this scope! You any the wiser on the Magneto? Link to comment Share on other sites More sharing options...
David Hancock Posted August 22, 2016 Author Report Share Posted August 22, 2016 Just spoken to the very helpful people - Tracy and Jordan - at March. V3 on a mod. Pay day Thursday ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.